Am 15.11.19 um 02:34 schrieb Rob Herring:
>> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
>> index a8cc2d23e7ef..3439647ecf97 100644
>> --- a/arch/arm/boot/dts/rtd1195.dtsi
>> +++ b/arch/arm/boot/dts/rtd1195.dtsi
>> @@ -92,28 +92,36 @@
>> <0x18100000 0x18100000 0x01000000>,
>> <0x40000000 0x40000000 0xc0000000>;
>>
>> - wdt: watchdog@18007680 {
>> - compatible = "realtek,rtd1295-watchdog";
>> - reg = <0x18007680 0x100>;
>> - clocks = <&osc27M>;
>> - };
>> -
>> - uart0: serial@18007800 {
>> - compatible = "snps,dw-apb-uart";
>> - reg = <0x18007800 0x400>;
>> - reg-shift = <2>;
>> - reg-io-width = <4>;
>> - clock-frequency = <27000000>;
>> - status = "disabled";
>> - };
>> -
>> - uart1: serial@1801b200 {
>> - compatible = "snps,dw-apb-uart";
>> - reg = <0x1801b200 0x100>;
>> - reg-shift = <2>;
>> - reg-io-width = <4>;
>> - clock-frequency = <27000000>;
>> - status = "disabled";
>> + rbus: r-bus@18000000 {
>
> Following node names should be generic: bus@...
Fixed for all four SoCs.
That seems inconsistent with specific pci@... & usb@... (both from OF),
but I see now the Amlogic-specific buses that I was inspired by do use
bus@..., too.
Thanks,
Andreas
--
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)
