On Thu, Nov 14, 2019 at 10:39:00AM +1030, Marian Mihailescu wrote: > Add device tree node for Mali GPU for Exynos 542x SoC. > GPU is disabled by default, and is enabled for each board after the > regulator is defined. Tested on Odroid-XU4. > > Signed-off-by: Marian Mihailescu <mihailescu2m@xxxxxxxxx> > --- > > Changes since v4: > - fixed so it applies for latest 5.4-rc7 > > Changes since v3: > - fixed compatible to match bindings > > Changes since v2: > - separate patch for bindings > - fixed bindings typo > > Changes since v1: > - used generic node and label for GPU > - added bindings for compatible > - fixed irq indentation > - fixed interrupt-names to match bindings > - added cooling cells for future TMU connection > - used generic node and label for GPU opp table > - removed always-on from SoC GPU regulator > > --- > arch/arm/boot/dts/exynos5420.dtsi | 50 +++++++++++++++++++++++++++ > arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 6 +++- > 2 files changed, 55 insertions(+), 1 deletion(-) Again tried to apply... but it causes new DTS warnings: arch/arm/boot/dts/exynos5420.dtsi:692.19-695.7: Warning (unit_address_vs_reg): /soc/gpu@11800000/opp-table/opp@177000000: node has a unit name, but no reg property Send the patches passing checkpatch and not introducing warnings (make dtbs W=1). Best regards, Krzysztof
