Hi Abhishek,
> Add documentation for pcm parameters.
>
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
>
> ---
>
> Changes in v4:
> - Fix incorrect function name in hci_bcm
>
> Changes in v3:
> - Change disallow baudrate setting to return -EBUSY if called before
> ready. bcm_proto is no longer modified and is back to being const.
> - Changed btbcm_set_pcm_params to btbcm_set_pcm_int_params
> - Changed brcm,sco-routing to brcm,bt-sco-routing
>
> Changes in v2:
> - Use match data to disallow baudrate setting
> - Parse pcm parameters by name instead of as a byte string
> - Fix prefix for dt-bindings commit
>
> .../devicetree/bindings/net/broadcom-bluetooth.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> index c749dc297624..42fb2fa8143d 100644
> --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> @@ -29,6 +29,11 @@ Optional properties:
> - "lpo": external low power 32.768 kHz clock
> - vbat-supply: phandle to regulator supply for VBAT
> - vddio-supply: phandle to regulator supply for VDDIO
> + - brcm,bt-sco-routing: 0-3 (PCM, Transport, Codec, I2S)
> + - brcm,pcm-interface-rate: 0-4 (128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps)
> + - brcm,pcm-frame-type: 0-1 (short, long)
> + - brcm,pcm-sync-mode: 0-1 (slave, master)
> + - brcm,pcm-clock-mode: 0-1 (slave, master)
I think that all of them need to start with brcm,bt- prefix since it is rather Bluetooth specific.
>
>
> Example:
> @@ -40,5 +45,11 @@ Example:
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> max-speed = <921600>;
> +
> + brcm,bt-sco-routing = [01];
> + brcm,pcm-interface-rate = [02];
> + brcm,pcm-frame-type = [00];
> + brcm,pcm-sync-mode = [01];
> + brcm,pcm-clock-mode = [01];
> };
My personal taste would be to add a comment after each entry that gives the human readable setting.
Regards
Marcel
