Emlid Neutis board has another variant with H3 instead of H5. This patchset adds support for this board by moving common bits to sunxi-h3-h5-emlid-neutis.dtsi and then including it in processor-specific DTS. Changes from V1: - moved HDMI nodes from DTSI to DTS - added dt-bindings for Neutis N5H3 - made use of an array of pins in gpio-regulator node Georgii Staroselskii (3): arm: dts: allwinner: Split out non-SoC specific parts of Neutis N5 arm: dts: sunxi: Add Neutis N5H3 support dt-bindings: arm: sunxi: add Neutis N5H3 Documentation/devicetree/bindings/arm/sunxi.yaml | 6 + arch/arm/boot/dts/Makefile | 1 + .../dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts | 72 +++++++++ arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi | 11 ++ arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi | 170 +++++++++++++++++++++ .../sun50i-h5-emlid-neutis-n5-devboard.dts | 95 +----------- .../dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi | 64 +------- 7 files changed, 265 insertions(+), 154 deletions(-) create mode 100644 arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3-devboard.dts create mode 100644 arch/arm/boot/dts/sun8i-h3-emlid-neutis-n5h3.dtsi create mode 100644 arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi -- 2.7.4
