* Benoit Parrot <bparrot@xxxxxx> [191112 14:25]: > Both CAL and VIP rely on this clock domain. But CAL DPHY require > LVDSRX_96M_GFCLK to be active. When this domain is set to HWSUP the > LVDSRX_96M_GFCLK is on;y active when VIP1 clock is also active. If only > CAL on DRA72x (which uses the VIP2 clkctrl) probes the CAM domain is > enabled but the LVDSRX_96M_GFCLK is left gated. Since LVDSRX_96M_GFCLK > is sourcing the input clock to the DPHY then actual frame capture cannot > start as the phy are inactive. > > So we either have to also enabled VIP1 even if we don't intend on using > it or we need to set the CAM domain to use SWSUP only. > > This patch implements the latter. Best that Tero picks up this one too if OK: Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
