From: Tero Kristo <t-kristo@xxxxxx> clkout1 clock node and its generation tree was missing. Add this based on the data on TRM and PRCM functional spec. commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for clkout1 clock") which is needed for the ov2659 camera sensor clock definition hence it is being re-applied here. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "clkout1-*ck" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Fixes: 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") Signed-off-by: Tero Kristo <t-kristo@xxxxxx> Tested-by: Benoit Parrot <bparrot@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Benoit Parrot <bparrot@xxxxxx> --- arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 091356f2a8c1..c726cd8dbdf1 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -704,6 +704,60 @@ ti,bit-shift = <8>; reg = <0x2a48>; }; + + clkout1_osc_div_ck: clkout1-osc-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkin_ck>; + ti,bit-shift = <20>; + ti,max-div = <4>; + reg = <0x4100>; + }; + + clkout1_src2_mux_ck: clkout1-src2-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>; + reg = <0x4100>; + }; + + clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4100>; + }; + + clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout1_src2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4100>; + }; + + clkout1_mux_ck: clkout1-mux-ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, + <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; + ti,bit-shift = <16>; + reg = <0x4100>; + }; + + clkout1_ck: clkout1-ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout1_mux_ck>; + ti,bit-shift = <23>; + reg = <0x4100>; + }; }; &prcm { -- 2.17.1