On 2019/11/11 下午1:22, Manivannan Sadhasivam wrote:
Hi Kever,
On Mon, Nov 11, 2019 at 08:51:57AM +0800, Kever Yang wrote:
Add vdd_log node according to rock960 schematic V13.
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index c7d48d41e184..73afee257115 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -76,6 +76,18 @@
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
};
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-init-microvolt = <950000>;
The default value seems to be 0.9v as per both Rock960 and Ficus schematics.
The default value is 0.9V when pwm-regulator is not enabled, and this
'init-microvolt' suppose to set the
init value when pwm-regulator is enabled. I set this to 950mV because
Peter report that he experience
the system hang during Fedora boot up, and update the vdd_log to 950mV
can fix the issue due to
engineer measure on another rk3399 board puma-Q7.
Thanks,
- Kever
Other than that,
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Thanks,
Mani
+ vin-supply = <&vcc_sys>;
+ };
};
&cpu_l0 {
--
2.17.1
