Quoting Nicolas Ferre (2014-04-30 11:12:51) > On 22/04/2014 06:12, Boris BREZILLON : > > Hello, > > > > This series introduce the real clock model (as described in atmel datasheets) > > for slow and main clocks. > > > > The modifications introduced by this series break the DT compat, but, as the > > at91 CCF based implementation is pretty new (introduced in 3.14 only for sama5 > > eval boards) I think it won't impact a lot of users. > > > > Nicolas, Mike, if this series is accepted, I'd like to get it merged as soon as > > possible to prevent other developpers from using a deprecated DT binding. > > Moreover, I think this series should go through the same path for both clk > > and DT changes (whatever path is chosen: either at91 or clk tree) because the > > changes are tightly coupled. > > Boris, > > First of all, well... > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > > I didn't find something to add but the little comment about the > documentation that you already fixed in this v3 version. > > Mike, > > I would like to merge this whole series through my tree and then the > arm-soc tree. If it is okay for you, can you give your acknowledgement > before that I build a pull-request for the arm-soc guys? Patches #1-4: Acked-by: Mike Turquette <mturquette@xxxxxxxxxx> Regards, Mike > > Thanks a lot, bye, > > > Changes since v2: > > - add missing compatible in pmc.c > > - fix sam9261 slow clock definition > > - move xtal nodes out of /clocks node > > - fix DT bindings documentation > > - fix main RC oscillator initilization > > > > Changes since v1: > > - fix sam9rl main clk definition > > Boris BREZILLON (11): > > clk: at91: rework main clk implementation > > clk: at91: update main clk documentation > > clk: at91: add slow clks driver > > clk: at91: add slow clk documentation > > ARM: at91/dt: move sama5d3 SoC to the new main/slow clk model > > ARM: at91/dt: add xtal frequencies to sama5d3xcm boards > > ARM: at91/dt: add xtal frequencies to sama5d3 xplained board > > ARM: at91/dt: move at91sam9261 SoC to the new main clock model > > ARM: at91/dt: define main xtal frequency of the at91sam9261ek board > > ARM: at91/dt: move at91sam9rl SoC to the new slow/main clock models > > ARM: at91/dt: define sam9rlek crystal frequencies > > > > .../devicetree/bindings/clock/at91-clock.txt | 128 ++++- > > arch/arm/boot/dts/at91-sama5d3_xplained.dts | 8 + > > arch/arm/boot/dts/at91sam9261.dtsi | 23 +- > > arch/arm/boot/dts/at91sam9261ek.dts | 4 + > > arch/arm/boot/dts/at91sam9rl.dtsi | 46 +- > > arch/arm/boot/dts/at91sam9rlek.dts | 9 + > > arch/arm/boot/dts/sama5d3.dtsi | 61 ++- > > arch/arm/boot/dts/sama5d3xcm.dtsi | 8 + > > drivers/clk/at91/Makefile | 4 +- > > drivers/clk/at91/clk-main.c | 577 ++++++++++++++++++--- > > drivers/clk/at91/clk-slow.c | 467 +++++++++++++++++ > > drivers/clk/at91/pmc.c | 17 + > > drivers/clk/at91/pmc.h | 9 + > > drivers/clk/at91/sckc.c | 57 ++ > > drivers/clk/at91/sckc.h | 22 + > > include/linux/clk/at91_pmc.h | 1 + > > 16 files changed, 1352 insertions(+), 89 deletions(-) > > create mode 100644 drivers/clk/at91/clk-slow.c > > create mode 100644 drivers/clk/at91/sckc.c > > create mode 100644 drivers/clk/at91/sckc.h > > > > > -- > Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
