From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]
S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 18a7f396ac5f7..abd1705635f9b 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -169,6 +169,8 @@
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
@@ -544,6 +546,13 @@
cap-sd-highspeed;
};
+&pinctrl_0 {
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&rtc {
status = "okay";
};
--
2.20.1
