RE: [PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,


Thank you for your feedback!

> From: linux-renesas-soc-owner@xxxxxxxxxxxxxxx <linux-renesas-soc-owner@xxxxxxxxxxxxxxx> On Behalf Of Laurent Pinchart
> Sent: 07 November 2019 20:49
> Subject: Re: [PATCH v3 5/7] drm/panel: panel-simple: Add connector type for etm0700g0dh6
> 
> Hi Fabrizio,
> 
> Thank you for the patch.
> 
> On Thu, Nov 07, 2019 at 08:11:01PM +0000, Fabrizio Castro wrote:
> > Add connector type for the etm0700g0dh6 from Emerging Display
> > Technologies (EDT).
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> >
> > ---
> > v2->v3:
> > * New patch
> > ---
> >  drivers/gpu/drm/panel/panel-simple.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 5d48768..82065ff 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -1342,6 +1342,7 @@ static const struct panel_desc edt_etm0700g0dh6 = {
> >  	},
> >  	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
> >  	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> > +	.connector_type = DRM_MODE_CONNECTOR_PARALLEL,
> 
> I still think we should have a DRM_MODE_CONNECTOR_PANEL, but regardless,
> this panel seems to match DRM_MODE_CONNECTOR_DPI.

Thank you! I wasn't really sure about which definition to pick, DRM_MODE_CONNECTOR_DPI
will surely work just fine.

Thanks,
Fab

> 
> >  };
> >
> >  static const struct panel_desc edt_etm0700g0bdh6 = {
> 
> --
> Regards,
> 
> Laurent Pinchart




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux