Hi, This is a rework of Jernej's previous work[1] taking account all the previous remarks. Bindings is still strict but probe in the driver are now optionnals. If someone could confirm that the PWM is not broken, as my board doesn't output it. I didn't add the acked-tags as there are big changes. Thanks, Clément Jernej's cover: Allwinner H6 SoC has PWM core which is basically the same as that found in A20, it's just depends on additional bus clock and reset line. This series adds support for it and extends PWM driver functionality in a way that it's now possible to bypass whole core and output PWM source clock directly as a PWM signal. This functionality is needed by AC200 chip, which is bundled in same physical package as H6 SoC, to serve as a clock source of 24 MHz. AC200 clock input pin is bonded internally to the second PWM channel. I would be grateful if anyone can test this patch series for any kind of regression on other SoCs. [1]: https://patchwork.kernel.org/cover/11061737/ Changes in v4: - item description in correct order and add a blank line - use %pe for printing PTR_ERR - don't print error when it's an EPROBE_DEFER - change output clock bypass formula to match PWM policy Changes in v3: - Documentation update to allow one clock without name - Change reset optional to shared - If reset probe failed return an error - Remove old clock probe - Update bypass enabled formula Changes in v2: - Remove allOf in Documentation - Add H6 example in Documentation - Change clock name from "pwm" to "mod" - Change reset quirk to optional probe - Change bus_clock quirk to optional probe - Add limitation comment about mod_clk_output - Add quirk for mod_clk_output - Change bypass formula Clément Péron (1): [DO NOT MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM Jernej Skrabec (6): dt-bindings: pwm: allwinner: Add H6 PWM description pwm: sun4i: Add an optional probe for reset line pwm: sun4i: Add an optional probe for bus clock pwm: sun4i: Add support to output source clock directly pwm: sun4i: Add support for H6 PWM arm64: dts: allwinner: h6: Add PWM node .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 48 +++++++ .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++ drivers/pwm/pwm-sun4i.c | 134 +++++++++++++++++- 4 files changed, 192 insertions(+), 4 deletions(-) -- 2.20.1
