In an effort to repurpose lvds-encoder.c to also serve the function of LVDS decoders, we ended up defining a new "generic" compatible string, therefore adapt the dt-bindings to fit the new purpose. Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx> --- v2->v3: * Extracted conversion to lvds-codec as per Rob's comment v1->v2: * Converted to dt-schema as per Neil's comment --- .../bindings/display/bridge/lvds-codec.yaml | 120 +++++++++++++++++++++ .../bindings/display/bridge/lvds-transmitter.yaml | 91 ---------------- 2 files changed, 120 insertions(+), 91 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml delete mode 100644 Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml new file mode 100644 index 0000000..3ebdf96 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Transparent LVDS encoders and LVDS decoders + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> + +description: | + This binding supports transparent LVDS encoders and LVDS decoders that don't + require any configuration. + + LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple + incompatible data link layers have been used over time to transmit image data + to LVDS panels. This binding targets devices compatible with the following + specifications only. + + [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February + 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) + [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National + Semiconductor + [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video + Electronics Standards Association (VESA) + + Those devices have been marketed under the FPD-Link and FlatLink brand names + among others. + +properties: + compatible: + description: | + Any encoder or decoder compatible with this generic binding, but with + additional properties not listed here, must define its own binding and + list a device specific compatible first followed by the generic compatible + enum: + - lvds-encoder # for LVDS encoders + - lvds-decoder # for LVDS decoders + + ports: + type: object + description: | + This device has two video ports. Their connections are modeled using the + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt + properties: + port@0: + type: object + description: | + With LVDS encoders port 0 is for parallel input + With LVDS decoders port 0 is for LVDS input + + port@1: + type: object + description: | + With LVDS encoders port 1 is for LVDS output + With LVDS decoders port 1 is for parallel output + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +examples: + - | + lvds-encoder { + compatible = "lvds-encoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_enc_in: endpoint { + remote-endpoint = <&display_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + + lvds_enc_out: endpoint { + remote-endpoint = <&lvds_panel_in>; + }; + }; + }; + }; + + - | + lvds-decoder { + compatible = "lvds-decoder"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_dec_in: endpoint { + remote-endpoint = <&display_out_lvds>; + }; + }; + + port@1 { + reg = <1>; + + lvds_dec_out: endpoint { + remote-endpoint = <&rgb_panel_in>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml deleted file mode 100644 index 5be163a..0000000 --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.yaml +++ /dev/null @@ -1,91 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/bridge/lvds-transmitter.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Parallel to LVDS Encoder - -maintainers: - - Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> - -description: | - This binding supports the parallel to LVDS encoders that don't require any - configuration. - - LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple - incompatible data link layers have been used over time to transmit image data - to LVDS panels. This binding targets devices compatible with the following - specifications only. - - [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February - 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) - [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National - Semiconductor - [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video - Electronics Standards Association (VESA) - - Those devices have been marketed under the FPD-Link and FlatLink brand names - among others. - -properties: - compatible: - description: | - Any encoder or decoder compatible with this generic binding, but with - additional properties not listed here, must define its own binding and - list a device specific compatible first followed by the generic compatible - enum: - - lvds-encoder - - ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt - properties: - port@0: - type: object - description: | - Port 0 is for parallel input - - port@1: - type: object - description: | - Port 1 is for LVDS output - - required: - - port@0 - - port@1 - -required: - - compatible - - ports - -examples: - - | - lvds-encoder { - compatible = "lvds-encoder"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - lvds_enc_in: endpoint { - remote-endpoint = <&display_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - - lvds_enc_out: endpoint { - remote-endpoint = <&lvds_panel_in>; - }; - }; - }; - }; - -... -- 2.7.4
