[PATCH 2/2] iio: imu: mpu6050: Add support for vdd-supply regulator

[Stephan Gerhold <stephan@xxxxxxxxxxx>]

MPU6050 has two power supply pins: VDD and VLOGIC, but the mpu6050
only supports enabling one of them at the moment. In some cases,
they may need to be enabled separately.

Add an additional "vdd-supply", but keep the code simple by making
the driver use the regulator bulk API. This actually allows further
simplifying the code since regulator_bulk_* already logs the errors
for us.

Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 30 +++++++---------------
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  5 ++--
 2 files changed, 12 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 354030e9bed5..8e50dbcd730b 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -1144,11 +1144,8 @@ static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
 {
 	int result;
 
-	result = regulator_enable(st->vddio_supply);
-	if (result) {
-		dev_err(regmap_get_device(st->map),
-			"Failed to enable regulator: %d\n", result);
-	} else {
+	result = regulator_bulk_enable(ARRAY_SIZE(st->supplies), st->supplies);
+	if (result == 0) {
 		/* Give the device a little bit of time to start up. */
 		usleep_range(35000, 70000);
 	}
@@ -1158,14 +1155,7 @@ static int inv_mpu_core_enable_regulator(struct inv_mpu6050_state *st)
 
 static int inv_mpu_core_disable_regulator(struct inv_mpu6050_state *st)
 {
-	int result;
-
-	result = regulator_disable(st->vddio_supply);
-	if (result)
-		dev_err(regmap_get_device(st->map),
-			"Failed to disable regulator: %d\n", result);
-
-	return result;
+	return regulator_bulk_disable(ARRAY_SIZE(st->supplies), st->supplies);
 }
 
 static void inv_mpu_core_disable_regulator_action(void *_data)
@@ -1239,14 +1229,12 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 		return -EINVAL;
 	}
 
-	st->vddio_supply = devm_regulator_get(dev, "vddio");
-	if (IS_ERR(st->vddio_supply)) {
-		if (PTR_ERR(st->vddio_supply) != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get vddio regulator %d\n",
-				(int)PTR_ERR(st->vddio_supply));
-
-		return PTR_ERR(st->vddio_supply);
-	}
+	st->supplies[0].supply = "vdd";
+	st->supplies[1].supply = "vddio";
+	result = devm_regulator_bulk_get(dev, ARRAY_SIZE(st->supplies),
+					 st->supplies);
+	if (result)
+		return result;
 
 	result = inv_mpu_core_enable_regulator(st);
 	if (result)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 52fcf45050a5..96cbd7f2b4b3 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -12,6 +12,7 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/trigger.h>
@@ -130,7 +131,7 @@ struct inv_mpu6050_hw {
  *  @chip_period:	chip internal period estimation (~1kHz).
  *  @it_timestamp:	timestamp from previous interrupt.
  *  @data_timestamp:	timestamp for next data sample.
- *  @vddio_supply	voltage regulator for the chip.
+ *  @supplies:		voltage regulators for the chip.
  *  @magn_disabled:     magnetometer disabled for backward compatibility reason.
  *  @magn_raw_to_gauss:	coefficient to convert mag raw value to Gauss.
  *  @magn_orient:       magnetometer sensor chip orientation if available.
@@ -154,7 +155,7 @@ struct inv_mpu6050_state {
 	s64 chip_period;
 	s64 it_timestamp;
 	s64 data_timestamp;
-	struct regulator *vddio_supply;
+	struct regulator_bulk_data supplies[2];
 	bool magn_disabled;
 	s32 magn_raw_to_gauss[3];
 	struct iio_mount_matrix magn_orient;
-- 
2.23.0