Hi Vivek, On 04/30/14 14:25, Vivek Gautam wrote: > Add required device node for usb2phy to let enable USB 2.0 > support. > > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > --- > arch/arm/boot/dts/exynos5420.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index cfa3755..16b860a 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -737,4 +737,14 @@ > clock-names = "secss"; > samsung,power-domain = <&g2d_pd>; > }; > + > + phy@12130000 { As we will be changing over to reference-based updation of nodes in the board dts files, it would be good to add node reference also while adding new nodes. Like : usb_phy: phy@12130000 { Regards Arun > + compatible = "samsung,exynos5250-usb2-phy"; > + reg = <0x12130000 0x100>; > + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; > + clock-names = "phy", "ref"; > + #phy-cells = <1>; > + samsung,sysreg-phandle = <&sysreg_system_controller>; > + samsung,pmureg-phandle = <&pmu_system_controller>; > + }; > }; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html