For rk3399-roc-pc is a mezzanine board available that carries M.2 and
POE interfaces. Use it with a separate dts.
---
v3: Use enum in binding and full name in compatible string and file name.
v2: Add new compatible string for roc-pc with mezzanine board.
--
Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
.../devicetree/bindings/arm/rockchip.yaml | 4 +-
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3399-roc-pc-mezzanine.dts | 72 ++
.../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 770 ++++++++++++++++++
5 files changed, 847 insertions(+), 757 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index bf86e8237363..ddf6c8f19a49 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -89,7 +89,9 @@ properties:
- description: Firefly ROC-RK3399-PC
items:
- - const: firefly,roc-rk3399-pc
+ - enum:
+ - firefly,roc-rk3399-pc
+ - firefly,roc-rk3399-pc-mezzanine
- const: rockchip,rk3399
- description: FriendlyElec NanoPi4 series boards
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a959434ad46e..800f9454b2ca 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
new file mode 100644
index 000000000000..d6b3042cffa9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@xxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3399-PC Mezzanine Board";
+ compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+
+ vcc3v3_ngff: vcc3v3-ngff {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_ngff";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v3_ngff_en>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v3_pcie_en>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_perst>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ ngff {
+ vcc3v3_ngff_en: vcc3v3-ngff-en {
+ rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ vcc3v3_pcie_en: vcc3v3-pcie-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_perst: pcie-perst {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index 7e07dae33d0f..cd4195425309 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -4,764 +4,9 @@
*/
/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-roc-pc.dtsi"
/ {
model = "Firefly ROC-RK3399-PC Board";
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1500000>;
- poll-interval = <100>;
-
- recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <18000>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_key_l>;
-
- power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
-
- work-led {
- label = "green:work";
- gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- diy-led {
- label = "red:diy";
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
-
- yellow-led {
- label = "yellow:yellow-led";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc0";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- vcc_vbus_typec0: vcc-vbus-typec0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_vbus_typec0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- /*
- * should be placed inside mp8859, but not until mp8859 has
- * its own dt-binding.
- */
- dc_12v: mp8859-dcdc1 {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&vcc_vbus_typec0>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_vbus_typec1: vcc-vbus-typec1 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc_vbus_typec1_en>;
- regulator-name = "vcc_vbus_typec1";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc_sys_en>;
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- vin-supply = <&vcc3v3_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vcc13-supply = <&vcc3v3_sys>;
- vcc14-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_3v0>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_codec: LDO_REG1 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_hdmi: LDO_REG2 {
- regulator-name = "vcc1v8_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb1: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb1_int>;
- vbus-supply = <&vcc_vbus_typec1>;
- status = "okay";
- };
-};
-
-&i2c7 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc_vbus_typec0>;
- status = "okay";
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcca1v8_codec>;
- bt656-supply = <&vcc_3v0>;
- gpio1830-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwr_key_l: pwr-key-l {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- lcd-panel {
- lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- diy_led_gpio: diy_led-gpio {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- work_led_gpio: work_led-gpio {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- yellow_led_gpio: yellow_led-gpio {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc_sys_en: vcc-sys-en {
- rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- hub_rst: hub-rst {
- rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- usb-typec {
- vcc_vbus_typec1_en: vcc-vbus-typec1-en {
- rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- fusb1_int: fusb1-int {
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- phy-supply = <&vcc_vbus_typec0>;
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- phy-supply = <&vcc_vbus_typec1>;
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
new file mode 100644
index 000000000000..287f97488f65
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -0,0 +1,770 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3399-PC Board";
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1500000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_key_l>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+ work-led {
+ label = "green:work";
+ gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ diy-led {
+ label = "red:diy";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+
+ yellow-led {
+ label = "yellow:yellow-led";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_vbus_typec0: vcc-vbus-typec0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_vbus_typec0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+ dc_12v: mp8859-dcdc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc_vbus_typec0>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_vbus_typec1: vcc-vbus-typec1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_vbus_typec1_en>;
+ regulator-name = "vcc_vbus_typec1";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_sys_en>;
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vcc13-supply = <&vcc3v3_sys>;
+ vcc14-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_3v0>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG1 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcc1v8_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb1: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb1_int>;
+ vbus-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ audio-supply = <&vcca1v8_codec>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwr_key_l: pwr-key-l {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ yellow_led_gpio: yellow_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc_sys_en: vcc-sys-en {
+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hub_rst: hub-rst {
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ usb-typec {
+ vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ fusb1_int: fusb1-int {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--
2.20.1
