Add device tree bindings for PIT64B timer. Cc: Rob Herring <robh@xxxxxxxxxx> Cc: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- Hi Rob, Nicolas, You Reviewed-by/Acked-by v1 [1] of this patch but I didn't collect it in this version since I removed the clock-frequency binding in this version. Thank you! Change in v2: - removed clock-frequency binding [1] https://lore.kernel.org/lkml/1552580772-8499-1-git-send-email-claudiu.beznea@xxxxxxxxxxxxx/ Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 9fbde401a090..e003a553b986 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -10,6 +10,12 @@ PIT Timer required properties: - interrupts: Should contain interrupt for the PIT which is the IRQ line shared across all System Controller members. +PIT64B Timer required properties: +- compatible: Should be "microchip,sam9x60-pit64b" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt for PIT64B timer +- clocks: Should contain the available clock sources for PIT64B timer. + System Timer (ST) required properties: - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" - reg: Should contain registers location and length -- 2.7.4
