[PATCH] arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For rk3399-roc-pc is a mezzanine board available that carries M.2 and
POE interfaces. Use it with a separate dts.

Signed-off-by: Markus Reichl <m.reichl@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3399-roc-pc-mezz.dts  |  52 ++
 .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 757 +----------------
 .../boot/dts/rockchip/rk3399-roc-pc.dtsi      | 767 ++++++++++++++++++
 4 files changed, 821 insertions(+), 756 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a959434ad46e..80ee9f1fc5f5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezz.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
new file mode 100644
index 000000000000..ee77677d2cf2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezz.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@xxxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index 7e07dae33d0f..cd4195425309 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -4,764 +4,9 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-roc-pc.dtsi"
 
 / {
 	model = "Firefly ROC-RK3399-PC Board";
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 25000 0>;
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&saradc 1>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <1500000>;
-		poll-interval = <100>;
-
-		recovery {
-			label = "Recovery";
-			linux,code = <KEY_VENDOR>;
-			press-threshold-microvolt = <18000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_key_l>;
-
-		power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
-
-		work-led {
-			label = "green:work";
-			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		diy-led {
-			label = "red:diy";
-			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-
-		yellow-led {
-			label = "yellow:yellow-led";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	vcc_vbus_typec0: vcc-vbus-typec0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_vbus_typec0";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	/*
-	 * should be placed inside mp8859, but not until mp8859 has
-	 * its own dt-binding.
-	 */
-	dc_12v: mp8859-dcdc1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_vbus_typec0>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_vbus_typec1: vcc-vbus-typec1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_vbus_typec1_en>;
-		regulator-name = "vcc_vbus_typec1";
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
-
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc_sys_en>;
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc3v3_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc3v3_sys>;
-		vcc2-supply = <&vcc3v3_sys>;
-		vcc3-supply = <&vcc3v3_sys>;
-		vcc4-supply = <&vcc3v3_sys>;
-		vcc6-supply = <&vcc3v3_sys>;
-		vcc7-supply = <&vcc3v3_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc3v3_sys>;
-		vcc10-supply = <&vcc3v3_sys>;
-		vcc11-supply = <&vcc3v3_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc3v3_sys>;
-		vcc14-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcc_3v0>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG1 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_hdmi: LDO_REG2 {
-				regulator-name = "vcc1v8_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc1v8_pmu: LDO_REG3 {
-				regulator-name = "vcc1v8_pmu";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca0v9_hdmi: LDO_REG7 {
-				regulator-name = "vcca0v9_hdmi";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <900000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc3v3_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-};
-
-&i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb1: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb1_int>;
-		vbus-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-};
-
-&i2c7 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	audio-supply = <&vcca1v8_codec>;
-	bt656-supply = <&vcc_3v0>;
-	gpio1830-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwr_key_l: pwr-key-l {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	lcd-panel {
-		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		diy_led_gpio: diy_led-gpio {
-			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		work_led_gpio: work_led-gpio {
-			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		yellow_led_gpio: yellow_led-gpio {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_gpio: vsel2-gpio {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		vcc_sys_en: vcc-sys-en {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		hub_rst: hub-rst {
-			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	usb-typec {
-		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
-			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	fusb30x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		fusb1_int: fusb1-int {
-			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
-	non-removable;
-	status = "okay";
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec0>;
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		phy-supply = <&vcc_vbus_typec1>;
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
new file mode 100644
index 000000000000..7e07dae33d0f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+		work-led {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy-led {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+
+		yellow-led {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_vbus_typec0: vcc-vbus-typec0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus_typec0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * should be placed inside mp8859, but not until mp8859 has
+	 * its own dt-binding.
+	 */
+	dc_12v: mp8859-dcdc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_vbus_typec0>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_vbus_typec1: vcc-vbus-typec1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_vbus_typec1_en>;
+		regulator-name = "vcc_vbus_typec1";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sys_en>;
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vcc13-supply = <&vcc3v3_sys>;
+		vcc14-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb1: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb1_int>;
+		vbus-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_gpio: yellow_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sys_en: vcc-sys-en {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb-typec {
+		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		fusb1_int: fusb1-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux