[PATCH v5 4/8] dt-bindings: mmc: Add optional generic properties for mmc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add optional properties for mmc hosts which are used to set clk delays
for different speed modes in the controller.

Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
---
 .../bindings/mmc/mmc-controller.yaml          | 92 +++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 080754e0ef35..87a83d966851 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -212,6 +212,98 @@ properties:
     description:
       eMMC HS400 enhanced strobe mode is supported
 
+  # Below mentioned are the clock (phase) delays which are to be configured
+  # in the controller while switching to particular speed mode. The range
+  # of values are 0 to 359 degrees.
+
+  clk-phase-legacy:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for Legacy Mode.
+
+  clk-phase-mmc-hs:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair degrees for MMC HS.
+
+  clk-phase-sd-hs:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SD HS.
+
+  clk-phase-uhs-sdr12:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SDR12.
+
+  clk-phase-uhs-sdr25:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SDR25.
+
+  clk-phase-uhs-sdr50:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SDR50.
+
+  clk-phase-uhs-sdr104:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SDR104.
+
+  clk-phase-uhs-ddr50:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for SD DDR50.
+
+  clk-phase-mmc-ddr52:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for MMC DDR52.
+
+  clk-phase-mmc-hs200:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for MMC HS200.
+
+  clk-phase-mmc-hs400:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 359
+    description:
+      Input/Output Clock Delay pair in degrees for MMC HS400.
+
   dsr:
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux