Daniel, only patch 15 needs to be changed in the tree being submitted to linux-next. But here is the entire series for completeness. Hi Thermal and MSM maintainers, I believe this series is now ready to be merged. The DT bindings and driver changes should go through the thermal tree and the changes to the DT files themselves should go through the MSM tree. There is no hard ordering dependency because we're adding a new property to the driver. It would help to soak in linux-next for a few weeks to catch anything on kernelci.org. 1-4, 7, 14, 15 => thermal tree 5, 6, 8-13 => msm tree (already applied by Andy) Regards, Amit Changes since v6: - Stephen reported a warning that only shows up with gcc 9.x (https://lore.kernel.org/lkml/CAHLCerOkeOEEUgtJ=YgDKKXDiyFXHQ4LBdzg3-3VtKvpyceqFg@xxxxxxxxxxxxxx/). Include a patch to initialise the index variable to zero. Changes since v5: - Julia found a missing put_device() call in the success path of tsens_register() while baking in linux-next. A single line change to allow the error and success path to use the call to put_device(). Thanks Julia and LKP. Changes since v4: - Change to of-thermal core[1] to force interrupts w/o changing polling-delay DT parameter - Corresponding changes to DT files to remove the hunks setting the values to 0 - Collected reviews and acks Changes since v3: - Fix up the YAML definitions based on Rob's review Changes since v2: - Addressed Stephen's review comment - Moved the dt-bindings to yaml (This throws up some new warnings in various QCOM devicetrees. I'll send out a separate series to fix them up) - Collected reviews and acks - Added the dt-bindings to MAINTAINERS Changes since v1: - Collected reviews and acks - Addressed Stephen's review comments (hopefully I got them all). - Completely removed critical interrupt infrastructure from this series. Will post that separately. - Fixed a bug in sign-extension of temperature. - Fixed DT bindings to use the name of the interrupt e.g. "uplow" and use platform_get_irq_byname(). Add interrupt support to TSENS. The first 6 patches are general fixes and cleanups to the driver before interrupt support is introduced. [1] https://lore.kernel.org/linux-arm-msm/1b53ef537203e629328285b4597a09e4a586d688.1571181041.git.amit.kucheria@xxxxxxxxxx/ Amit Kucheria (15): drivers: thermal: tsens: Get rid of id field in tsens_sensor drivers: thermal: tsens: Simplify code flow in tsens_probe drivers: thermal: tsens: Add __func__ identifier to debug statements drivers: thermal: tsens: Add debugfs support arm: dts: msm8974: thermal: Add thermal zones for each sensor arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors dt-bindings: thermal: tsens: Convert over to a yaml schema arm64: dts: sdm845: thermal: Add interrupt support arm64: dts: msm8996: thermal: Add interrupt support arm64: dts: msm8998: thermal: Add interrupt support arm64: dts: qcs404: thermal: Add interrupt support arm: dts: msm8974: thermal: Add interrupt support arm64: dts: msm8916: thermal: Add interrupt support drivers: thermal: tsens: Create function to return sign-extended temperature drivers: thermal: tsens: Add interrupt support .../bindings/thermal/qcom-tsens.txt | 55 -- .../bindings/thermal/qcom-tsens.yaml | 168 ++++++ MAINTAINERS | 1 + arch/arm/boot/dts/qcom-msm8974.dtsi | 92 +++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 +- arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 + arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 +- arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 + drivers/thermal/qcom/tsens-8960.c | 4 +- drivers/thermal/qcom/tsens-common.c | 529 ++++++++++++++++-- drivers/thermal/qcom/tsens-v0_1.c | 11 + drivers/thermal/qcom/tsens-v1.c | 29 + drivers/thermal/qcom/tsens-v2.c | 13 + drivers/thermal/qcom/tsens.c | 59 +- drivers/thermal/qcom/tsens.h | 286 ++++++++-- 16 files changed, 1102 insertions(+), 167 deletions(-) delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml -- 2.17.1
