Re: [PATCH v4 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Thu, Oct 31, 2019 at 04:11:41PM +0200, Laurent Pinchart wrote:
> Hi Mani,
> 
> On Thu, Oct 31, 2019 at 07:15:12PM +0530, Manivannan Sadhasivam wrote:
> > On Thu, Oct 31, 2019 at 03:15:38PM +0200, Laurent Pinchart wrote:
> > > On Wed, Oct 30, 2019 at 03:19:01PM +0530, Manivannan Sadhasivam wrote:
> > >> Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
> > >> add MAINTAINERS entry for the binding and driver.
> > >> 
> > >> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > >> ---
> > >>  .../devicetree/bindings/media/i2c/imx296.yaml | 94 +++++++++++++++++++
> > >>  MAINTAINERS                                   |  8 ++
> > >>  2 files changed, 102 insertions(+)
> > >>  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > >> 
> > >> diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > >> new file mode 100644
> > >> index 000000000000..c04ec2203268
> > >> --- /dev/null
> > >> +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > >> @@ -0,0 +1,94 @@
> > >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > >> +%YAML 1.2
> > >> +---
> > >> +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> > >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > >> +
> > >> +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> > >> +
> > >> +maintainers:
> > >> +  - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > >> +
> > >> +description: |-
> > >> +  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> > >> +  sensor with square pixel array and 1.58 M effective pixels. This chip
> > >> +  features a global shutter with variable charge-integration time. It is
> > >> +  programmable through I2C and 4-wire interfaces. The sensor output is
> > >> +  available via CSI-2 serial data output (1 Lane).
> > >> +
> > >> +properties:
> > >> +  compatible:
> > >> +    const: sony,imx296
> > >> +
> > >> +  reg:
> > >> +    maxItems: 1
> > >> +
> > >> +  clocks:
> > >> +    maxItems: 1
> > >> +
> > >> +  clock-names:
> > >> +    description:
> > >> +      Input clock for the sensor.
> > >> +    items:
> > >> +      - const: mclk
> > > 
> > > The pin is named INCK, let's name the clock accordingly.
> > 
> > Okay, I thought generic names are preferred here!
> >  
> > >> +  clock-frequency:
> > >> +    description:
> > >> +      Frequency of the mclk clock in Hertz.
> > > 
> > > This shouldn't be needed, you can retrieve the clock frequency at
> > > runtime from the clock source.
> > 
> > Unless the clock source is a fixed one! What if the clock source comes from
> > SoC? We need to set the rate, right?
> 
> In that case, if you want to hardcode the clock in DT, the preferred way
> is to use the assigned-clock-rates property. Otherwise, if the driver
> requires a specific clock frequency, it's better to hardcode it in the
> driver itself. In this specific case, I think assigned-clock-rates is
> best as the device can support three different clock frequencies.

Just note that if ACPI support is added to the sensor driver, you'll need
the clock-frequency property again, for that's the only way how the driver
will get the clock frequency.

This is certainly not something that has to be taken into account in DT
bindings, but in any case it'll add some lines of code in the driver which
are not very useful.

-- 
Sakari Ailus



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux