[PATCH 1/6] thermal: brcmstb_thermal: Do not use DT coefficients

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



At the time the brcmstb_thermal driver and its binding were merged, the
DT binding did not make the coefficients properties a mandatory one,
therefore all users of the brcmstb_thermal driver out there have a non
functional implementation with zero coefficients. Even if these
properties were provided, the formula used for computation is incorrect.

The coefficients are entirely process specific (right now, only 28nm is
supported) and not board or SoC specific, it is therefore appropriate to
hard code them in the driver given the compatibility string we are
probed with which has to be updated whenever a new process is
introduced.

We remove the existing coefficients definition since subsequent patches
are going to add support for a new process and will introduce new
coefficients as well.

Fixes: 9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 37 ++++------------------
 1 file changed, 6 insertions(+), 31 deletions(-)

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 5825ac581f56..42482af0422e 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -48,15 +48,6 @@
 #define AVS_TMON_TEMP_INT_CODE		0x1c
 #define AVS_TMON_TP_TEST_ENABLE		0x20
 
-/* Default coefficients */
-#define AVS_TMON_TEMP_SLOPE		-487
-#define AVS_TMON_TEMP_OFFSET		410040
-
-/* HW related temperature constants */
-#define AVS_TMON_TEMP_MAX		0x3ff
-#define AVS_TMON_TEMP_MIN		-88161
-#define AVS_TMON_TEMP_MASK		AVS_TMON_TEMP_MAX
-
 enum avs_tmon_trip_type {
 	TMON_TRIP_TYPE_LOW = 0,
 	TMON_TRIP_TYPE_HIGH,
@@ -108,23 +99,11 @@ struct brcmstb_thermal_priv {
 	struct thermal_zone_device *thermal;
 };
 
-static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
-				int *offset)
-{
-	*slope = thermal_zone_get_slope(tz);
-	*offset = thermal_zone_get_offset(tz);
-}
-
 /* Convert a HW code to a temperature reading (millidegree celsius) */
 static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
 					u32 code)
 {
-	const int val = code & AVS_TMON_TEMP_MASK;
-	int slope, offset;
-
-	avs_tmon_get_coeffs(tz, &slope, &offset);
-
-	return slope * val + offset;
+	return (410040 - (int)((code & 0x3FF) * 487));
 }
 
 /*
@@ -136,20 +115,16 @@ static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
 static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
 					int temp, bool low)
 {
-	int slope, offset;
-
-	if (temp < AVS_TMON_TEMP_MIN)
-		return AVS_TMON_TEMP_MAX; /* Maximum code value */
-
-	avs_tmon_get_coeffs(tz, &slope, &offset);
+	if (temp < -88161)
+		return 0x3FF;	/* Maximum code value */
 
-	if (temp >= offset)
+	if (temp >= 410040)
 		return 0;	/* Minimum code value */
 
 	if (low)
-		return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+		return (u32)(DIV_ROUND_UP(410040 - temp, 487));
 	else
-		return (u32)((offset - temp) / abs(slope));
+		return (u32)((410040 - temp) / 487);
 }
 
 static int brcmstb_get_temp(void *data, int *temp)
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux