The current sun50i-h6-pine-h64 DT does not specify which model (A or B)
it supports.
When this file was created, only modelA was existing, but now both model
exists and with the time, this DT drifted to support the model B since it is
the most common one.
Furtheremore, some part of the model A does not work with it like ethernet and
HDMI connector (as confirmed by Jernej on IRC).
So it is time to settle the issue, and the easiest way is to state that
this DT is for model B.
Easiest since only a small name changes is required.
Doing the opposite (stating this file is for model A) will add changes (for
ethernet and HDMI) and so, will break too many setup.
Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/sunxi.yaml | 4 ++--
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 972b1e9ee804..9a1e4992b9e9 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -594,9 +594,9 @@ properties:
- const: pine64,pine64-plus
- const: allwinner,sun50i-a64
- - description: Pine64 PineH64
+ - description: Pine64 PineH64 model B
items:
- - const: pine64,pine-h64
+ - const: pine64,pine-h64-modelB
- const: allwinner,sun50i-h6
- description: Pine64 LTS
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 30102daf83cc..f9070d9e6c43 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -10,8 +10,8 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64";
- compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+ model = "Pine H64 model B";
+ compatible = "pine64,pine-h64-modelB", "allwinner,sun50i-h6";
aliases {
ethernet0 = &emac;
--
2.23.0
