Re: [PATCH] dt-bindings: usb: Convert Allwinner USB PHY controller to a schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Tue, Oct 22, 2019 at 06:18:10PM +0200, Maxime Ripard wrote:
> The Allwinner SoCs have a USB PHY controller that is supported in Linux,
> with a matching Device Tree binding.
> 
> Now that we have the DT validation in place, let's convert the device tree
> bindings for that controller over to a YAML schemas.
> 
> Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
> ---
>  .../phy/allwinner,sun4i-a10-usb-phy.yaml      | 541 ++++++++++++++++++
>  .../devicetree/bindings/phy/sun4i-usb-phy.txt |  68 ---
>  2 files changed, 541 insertions(+), 68 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
>  delete mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt

Perhaps this one should be split into multiple files. The oneOf's and 
if/then's are a bit much IMO.

You could always extract what's common and then $ref the common file.

> 
> diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
> new file mode 100644
> index 000000000000..de63a5eb1e2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
> @@ -0,0 +1,541 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner A10 USB PHY Device Tree Bindings
> +
> +maintainers:
> +  - Chen-Yu Tsai <wens@xxxxxxxx>
> +  - Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> +
> +properties:
> +  "#phy-cells":
> +    const: 1
> +
> +  compatible:
> +    enum:
> +      - allwinner,sun4i-a10-usb-phy
> +      - allwinner,sun5i-a13-usb-phy
> +      - allwinner,sun6i-a31-usb-phy
> +      - allwinner,sun7i-a20-usb-phy
> +      - allwinner,sun8i-a23-usb-phy
> +      - allwinner,sun8i-a33-usb-phy
> +      - allwinner,sun8i-a83t-usb-phy
> +      - allwinner,sun8i-h3-usb-phy
> +      - allwinner,sun8i-r40-usb-phy
> +      - allwinner,sun8i-v3s-usb-phy
> +      - allwinner,sun50i-a64-usb-phy
> +      - allwinner,sun50i-h6-usb-phy
> +
> +  reg:
> +    anyOf:
> +      - minItems: 2
> +        maxItems: 3
> +        items:
> +          - description: PHY Control registers
> +          - description: PHY PMU1 registers
> +          - description: PHY PMU2 registers
> +
> +      - minItems: 2
> +        maxItems: 5
> +        items:
> +          - description: PHY Control registers
> +          - description: PHY PMU0 registers
> +          - description: PHY PMU1 registers
> +          - description: PHY PMU2 registers
> +          - description: PHY PMU3 registers
> +
> +      - items:
> +          - description: PHY Control registers
> +          - description: PHY PMU0 registers
> +          - description: PHY PMU3 registers
> +
> +  reg-names:
> +    oneOf:
> +      - minItems: 2
> +        maxItems: 3
> +        items:
> +          - const: phy_ctrl
> +          - const: pmu1
> +          - const: pmu2
> +
> +      - minItems: 2
> +        maxItems: 5
> +        items:
> +          - const: phy_ctrl
> +          - const: pmu0
> +          - const: pmu1
> +          - const: pmu2
> +          - const: pmu3
> +
> +      - items:
> +          - const: phy_ctrl
> +          - const: pmu0
> +          - const: pmu3
> +
> +  clocks:
> +    anyOf:
> +      - description: USB PHY bus clock
> +
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          - description: USB OTG PHY bus clock
> +          - description: USB Host 0 PHY bus clock
> +          - description: USB Host 1 PHY bus clock
> +          - description: USB Host 2 PHY bus clock
> +
> +      - items:
> +          - description: USB OTG PHY bus clock
> +          - description: USB Host 0 PHY bus clock
> +          - description: USB Host 1 PHY bus clock
> +          - description: USB HSIC 12MHz clock
> +
> +      - items:
> +          - description: USB OTG PHY bus clock
> +          - description: USB Host PHY bus clock
> +
> +  clock-names:
> +    oneOf:
> +      - const: usb_phy
> +
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          - const: usb0_phy
> +          - const: usb1_phy
> +          - const: usb2_phy
> +          - const: usb3_phy
> +
> +      - items:
> +          - const: usb0_phy
> +          - const: usb1_phy
> +          - const: usb2_phy
> +          - const: usb2_hsic_12M
> +
> +      - items:
> +          - const: usb0_phy
> +          - const: usb3_phy
> +
> +  resets:
> +    anyOf:
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          - description: USB OTG reset
> +          - description: USB Host 1 Controller reset
> +          - description: USB Host 2 Controller reset
> +          - description: USB Host 3 Controller reset
> +
> +      - items:
> +          - description: USB OTG reset
> +          - description: USB Host Controller reset
> +
> +  reset-names:
> +    oneOf:
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          - const: usb0_reset
> +          - const: usb1_reset
> +          - const: usb2_reset
> +          - const: usb3_reset
> +
> +      - items:
> +          - const: usb0_reset
> +          - const: usb3_reset
> +
> +  usb0_id_det-gpios:
> +    description: GPIO to the USB OTG ID pin
> +
> +  usb0_vbus_det-gpios:
> +    description: GPIO to the USB OTG VBUS detect pin
> +
> +  usb0_vbus_power-supply:
> +    description: Power supply to detect the USB OTG VBUS
> +
> +  usb0_vbus-supply:
> +    description: Regulator controlling USB OTG VBUS
> +
> +  usb1_vbus-supply:
> +    description: Regulator controlling USB1 Host controller
> +
> +  usb2_vbus-supply:
> +    description: Regulator controlling USB2 Host controller
> +
> +  usb3_vbus-supply:
> +    description: Regulator controlling USB3 Host controller
> +
> +required:
> +  - "#phy-cells"
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - reg
> +  - reg-names
> +  - resets
> +  - reset-names
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun4i-a10-usb-phy
> +              - allwinner,sun7i-a20-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu1
> +            - const: pmu2
> +
> +        clocks:
> +          maxItems: 1
> +
> +        clock-names:
> +          const: usb_phy
> +
> +        resets:
> +          maxItems: 3
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +            - const: usb2_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun5i-a13-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 2
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu1
> +
> +        clocks:
> +          maxItems: 1
> +
> +        clock-names:
> +          const: usb_phy
> +
> +        resets:
> +          maxItems: 2
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun6i-a31-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu1
> +            - const: pmu2
> +
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +            - const: usb2_phy
> +
> +        resets:
> +          maxItems: 3
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +            - const: usb2_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - allwinner,sun8i-a23-usb-phy
> +              - allwinner,sun8i-a33-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 2
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu1
> +
> +        clocks:
> +          maxItems: 2
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +
> +        resets:
> +          maxItems: 2
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun8i-a83t-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu1
> +            - const: pmu2
> +
> +        clocks:
> +          maxItems: 4
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +            - const: usb2_phy
> +            - const: usb2_hsic_12M
> +
> +        resets:
> +          maxItems: 3
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +            - const: usb2_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun8i-h3-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 5
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu0
> +            - const: pmu1
> +            - const: pmu2
> +            - const: pmu3
> +
> +        clocks:
> +          maxItems: 4
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +            - const: usb2_phy
> +            - const: usb3_phy
> +
> +        resets:
> +          maxItems: 4
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +            - const: usb2_reset
> +            - const: usb3_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun8i-r40-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 4
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu0
> +            - const: pmu1
> +            - const: pmu2
> +
> +        clocks:
> +          maxItems: 3
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +            - const: usb2_phy
> +
> +        resets:
> +          maxItems: 3
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +            - const: usb2_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun8i-v3s-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 2
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu0
> +
> +        clocks:
> +          maxItems: 1
> +
> +        clock-names:
> +          const: usb0_phy
> +
> +        resets:
> +          maxItems: 1
> +
> +        reset-names:
> +          const: usb0_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun50i-a64-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu0
> +            - const: pmu1
> +
> +        clocks:
> +          maxItems: 2
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb1_phy
> +
> +        resets:
> +          maxItems: 2
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb1_reset
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: allwinner,sun50i-h6-usb-phy
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +        reg-names:
> +          items:
> +            - const: phy_ctrl
> +            - const: pmu0
> +            - const: pmu3
> +
> +        clocks:
> +          maxItems: 2
> +
> +        clock-names:
> +          items:
> +            - const: usb0_phy
> +            - const: usb3_phy
> +
> +        resets:
> +          maxItems: 2
> +
> +        reset-names:
> +          items:
> +            - const: usb0_reset
> +            - const: usb3_reset
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    usbphy: phy@01c13400 {
> +        compatible = "allwinner,sun4i-a10-usb-phy";
> +        reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
> +        reg-names = "phy_ctrl", "pmu1", "pmu2";
> +        clocks = <&usb_clk 8>;
> +        clock-names = "usb_phy";
> +        resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
> +        reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
> +        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
> +        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
> +        usb0_vbus-supply = <&reg_usb0_vbus>;
> +        usb1_vbus-supply = <&reg_usb1_vbus>;
> +        usb2_vbus-supply = <&reg_usb2_vbus>;
> +        #phy-cells = <1>;
> +    };
> diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> deleted file mode 100644
> index f2e120af17f0..000000000000
> --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -Allwinner sun4i USB PHY
> ------------------------
> -
> -Required properties:
> -- compatible : should be one of
> -  * allwinner,sun4i-a10-usb-phy
> -  * allwinner,sun5i-a13-usb-phy
> -  * allwinner,sun6i-a31-usb-phy
> -  * allwinner,sun7i-a20-usb-phy
> -  * allwinner,sun8i-a23-usb-phy
> -  * allwinner,sun8i-a33-usb-phy
> -  * allwinner,sun8i-a83t-usb-phy
> -  * allwinner,sun8i-h3-usb-phy
> -  * allwinner,sun8i-r40-usb-phy
> -  * allwinner,sun8i-v3s-usb-phy
> -  * allwinner,sun50i-a64-usb-phy
> -  * allwinner,sun50i-h6-usb-phy
> -- reg : a list of offset + length pairs
> -- reg-names :
> -  * "phy_ctrl"
> -  * "pmu0" for H3, V3s, A64 or H6
> -  * "pmu1"
> -  * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
> -  * "pmu3" for sun8i-h3 or sun50i-h6
> -- #phy-cells : from the generic phy bindings, must be 1
> -- clocks : phandle + clock specifier for the phy clocks
> -- clock-names :
> -  * "usb_phy" for sun4i, sun5i or sun7i
> -  * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
> -  * "usb0_phy", "usb1_phy" for sun8i
> -  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
> -  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
> -  * "usb0_phy" and "usb3_phy" for sun50i-h6
> -- resets : a list of phandle + reset specifier pairs
> -- reset-names :
> -  * "usb0_reset"
> -  * "usb1_reset"
> -  * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
> -  * "usb3_reset" for sun8i-h3 and sun50i-h6
> -
> -Optional properties:
> -- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
> -- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
> -- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
> -- usb0_vbus-supply : regulator phandle for controller usb0 vbus
> -- usb1_vbus-supply : regulator phandle for controller usb1 vbus
> -- usb2_vbus-supply : regulator phandle for controller usb2 vbus
> -- usb3_vbus-supply : regulator phandle for controller usb3 vbus
> -
> -Example:
> -	usbphy: phy@01c13400 {
> -		#phy-cells = <1>;
> -		compatible = "allwinner,sun4i-a10-usb-phy";
> -		/* phy base regs, phy1 pmu reg, phy2 pmu reg */
> -		reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
> -		reg-names = "phy_ctrl", "pmu1", "pmu2";
> -		clocks = <&usb_clk 8>;
> -		clock-names = "usb_phy";
> -		resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
> -		reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
> -		usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
> -		usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
> -		usb0_vbus-supply = <&reg_usb0_vbus>;
> -		usb1_vbus-supply = <&reg_usb1_vbus>;
> -		usb2_vbus-supply = <&reg_usb2_vbus>;
> -	};
> -- 
> 2.23.0
>
[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]

  Powered by Linux