Quoting Rajendra Nayak (2019-10-23 02:02:15)
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 04808a07d7da..6584ac6e6c7b 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -224,6 +224,25 @@
> };
> };
>
> + spmi_bus: spmi@c440000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0 0xc440000 0 0x1100>,
Please pad out the registers to 8 numbers. See sdm845.
> + <0 0xc600000 0 0x2000000>,
> + <0 0xe600000 0 0x100000>,
> + <0 0xe700000 0 0xa0000>,
> + <0 0xc40a000 0 0x26000>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
This is different than sdm845. I guess pdc is working?
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + cell-index = <0>;
> + };
> +
