On Mon, Oct 21, 2019 at 04:10:35AM +0200, Andreas Färber wrote:
> Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
>
> Reuse the existing RTD1295 watchdog compatible for now.
>
> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/rtd1195-mele-x1000.dts | 30 ++++++++
> arch/arm/boot/dts/rtd1195.dtsi | 128 +++++++++++++++++++++++++++++++
> 3 files changed, 160 insertions(+)
> create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
> create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 73d33611c372..89a951485da8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -858,6 +858,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> dtb-$(CONFIG_ARCH_RDA) += \
> rda8810pl-orangepi-2g-iot.dtb \
> rda8810pl-orangepi-i96.dtb
> +dtb-$(CONFIG_ARCH_REALTEK) += \
> + rtd1195-mele-x1000.dtb
> dtb-$(CONFIG_ARCH_REALVIEW) += \
> arm-realview-pb1176.dtb \
> arm-realview-pb11mp.dtb \
> diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
> new file mode 100644
> index 000000000000..ce9a255950d3
> --- /dev/null
> +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +/*
> + * Copyright (c) 2017 Andreas Färber
2019?
> + */
> +
> +/dts-v1/;
> +
> +#include "rtd1195.dtsi"
> +
> +/ {
> + compatible = "mele,x1000", "realtek,rtd1195";
> + model = "MeLE X1000";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
memory@0
> + device_type = "memory";
> + reg = <0x0 0x40000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
> new file mode 100644
> index 000000000000..475740c67d26
> --- /dev/null
> +++ b/arch/arm/boot/dts/rtd1195.dtsi
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
> +/*
> + * Copyright (c) 2017 Andreas Färber
> + */
> +
> +/memreserve/ 0x00000000 0x0000c000; /* boot code */
> +/memreserve/ 0x0000c000 0x000f4000;
> +/memreserve/ 0x01b00000 0x00400000; /* audio */
> +/memreserve/ 0x01ffe000 0x00004000; /* rpc ringbuf */
> +/memreserve/ 0x10000000 0x00100000; /* secure */
> +/memreserve/ 0x17fff000 0x00001000;
> +/memreserve/ 0x18000000 0x00100000; /* rbus */
> +/memreserve/ 0x18100000 0x01000000; /* nor */
You shouldn't have the same entries here and in /reserved-memory. There
was a time before /reserved-memory was fully supported, but we should be
well past that now.
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "realtek,rtd1195";
> + interrupt-parent = <&gic>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + clock-frequency = <1000000000>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + clock-frequency = <1000000000>;
> + };
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + secure@10000000 {
> + reg = <0x10000000 0x100000>;
> + no-map;
> + };
> +
> + rbus@18000000 {
> + reg = <0x18000000 0x100000>;
> + no-map;
This doesn't look right as it overlaps the register space.
> + };
> +
> + nor@18100000 {
> + reg = <0x18100000 0x1000000>;
> + no-map;
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
> + clock-frequency = <27000000>;
> + };
> +
> + osc27M: osc {
> + compatible = "fixed-clock";
> + clock-frequency = <27000000>;
> + #clock-cells = <0>;
> + clock-output-names = "osc27M";
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + wdt: watchdog@18007680 {
> + compatible = "realtek,rtd1295-watchdog";
> + reg = <0x18007680 0x100>;
> + clocks = <&osc27M>;
> + };
> +
> + uart0: serial@18007800 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x18007800 0x400>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <27000000>;
> + status = "disabled";
> + };
> +
> + uart1: serial@1801b200 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x1801b200 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clock-frequency = <27000000>;
> + status = "disabled";
> + };
> +
> + gic: interrupt-controller@ff011000 {
> + compatible = "arm,cortex-a7-gic";
> + reg = <0xff011000 0x1000>,
> + <0xff012000 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + };
> + };
> +};
> --
> 2.16.4
>
