Pins used for joystick are all configured as input. "push-pull" is not a
valid setting for an input pin.
Signed-off-by: Alexandre Torgue <alexandre.torgue@xxxxxx>
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 3f7fcba3a516..3789312c8539 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -220,7 +220,6 @@
joystick_pins: joystick {
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
- drive-push-pull;
bias-pull-down;
};
};
--
2.17.1
