Hi Rob, On 23/10/19 6:27 PM, Kishon Vijay Abraham I wrote: > Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a > PHY but a wrapper used to configure some of the input signals to the > SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes. > > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> > [jsarha@xxxxxx: Add separate compatible for Sierra(16G) and Torrent(10G) > SERDES] > Signed-off-by: Jyri Sarha <jsarha@xxxxxx> Since you've reviewed the other patches posted after this one, wanted to check if this somehow slipped out of your radar. Thanks Kishon > --- > .../bindings/phy/ti,phy-j721e-wiz.yaml | 159 ++++++++++++++++++ > 1 file changed, 159 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > > diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > new file mode 100644 > index 000000000000..8a1eccee6c1d > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml > @@ -0,0 +1,159 @@ > +# SPDX-License-Identifier: (GPL-2.0) > +# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"; > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > + > +title: TI J721E WIZ (SERDES Wrapper) > + > +maintainers: > + - Kishon Vijay Abraham I <kishon@xxxxxx> > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - ti,j721e-wiz-16g > + - ti,j721e-wiz-10g > + > + power-domains: > + maxItems: 1 > + > + clocks: > + maxItems: 3 > + description: clock-specifier to represent input to the WIZ > + > + clock-names: > + items: > + - const: fck > + - const: core_ref_clk > + - const: ext_ref_clk > + > + num-lanes: > + maxItems: 1 > + minimum: 1 > + maximum: 4 > + > + "#address-cells": > + const: 2 > + > + "#size-cells": > + const: 2 > + > + "#reset-cells": > + const: 1 > + > + ranges: true > + > + assigned-clocks: > + maxItems: 2 > + > + assigned-clock-parents: > + maxItems: 2 > + > +patternProperties: > + "^pll[0|1]_refclk$": > + type: object > + description: | > + WIZ node should have subnodes for each of the PLLs present in > + the SERDES. > + > + "^cmn_refclk1?$": > + type: object > + description: | > + WIZ node should have subnodes for each of the PMA common refclock > + provided by the SERDES. > + > + "^refclk_dig$": > + type: object > + description: | > + WIZ node should have subnode for refclk_dig to select the reference > + clock source for the reference clock used in the PHY and PMA digital > + logic. > + > + "^serdes@[0-9a-f]+$": > + type: object > + description: | > + WIZ node should have '1' subnode for the SERDES. It could be either > + Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the > + bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt > + Torrent SERDES should follow the bindings specified in > + Documentation/devicetree/bindings/phy/phy-cadence-dp.txt > + > +required: > + - compatible > + - power-domains > + - clocks > + - clock-names > + - num-lanes > + - "#address-cells" > + - "#size-cells" > + - "#reset-cells" > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + wiz@5000000 { > + compatible = "ti,j721e-wiz-16g"; > + #address-cells = <2>; > + #size-cells = <2>; > + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; > + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; > + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; > + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; > + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; > + num-lanes = <2>; > + #reset-cells = <1>; > + > + pll0_refclk { > + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; > + clock-output-names = "wiz1_pll0_refclk"; > + #clock-cells = <0>; > + assigned-clocks = <&wiz1_pll0_refclk>; > + assigned-clock-parents = <&k3_clks 293 13>; > + }; > + > + pll1_refclk { > + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; > + clock-output-names = "wiz1_pll1_refclk"; > + #clock-cells = <0>; > + assigned-clocks = <&wiz1_pll1_refclk>; > + assigned-clock-parents = <&k3_clks 293 0>; > + }; > + > + cmn_refclk { > + clocks = <&wiz1_refclk_dig>; > + clock-output-names = "wiz1_cmn_refclk"; > + #clock-cells = <0>; > + }; > + > + cmn_refclk1 { > + clocks = <&wiz1_pll1_refclk>; > + clock-output-names = "wiz1_cmn_refclk1"; > + #clock-cells = <0>; > + }; > + > + refclk_dig { > + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; > + clock-output-names = "wiz0_refclk_dig"; > + #clock-cells = <0>; > + assigned-clocks = <&wiz0_refclk_dig>; > + assigned-clock-parents = <&k3_clks 292 11>; > + }; > + > + serdes@5000000 { > + compatible = "cdns,ti,sierra-phy-t0"; > + reg-names = "serdes"; > + reg = <0x00 0x5000000 0x00 0x10000>; > + #address-cells = <1>; > + #size-cells = <0>; > + resets = <&serdes_wiz0 0>; > + reset-names = "sierra_reset"; > + clocks = <&wiz0_cmn_refclk>, <&wiz0_cmn_refclk1>; > + clock-names = "cmn_refclk", "cmn_refclk1"; > + }; > + }; >
