On Thu, Oct 24, 2019 at 08:12:34PM +0530, Manivannan Sadhasivam wrote: > Add devicetree support for Thor96 board from Einfochips. This board is > one of the 96Boards Consumer Edition platform powered by the NXP > i.MX8MQ SoC. > > Following are the features supported currently: > > 1. uSD > 2. WiFi/BT > 3. Ethernet > 4. EEPROM (M24256) > 5. NOR Flash (W25Q256JW) > 6. 2xUSB3.0 ports and 1xUSB2.0 port at HS expansion > > More information about this board can be found in Arrow website: > https://www.arrow.com/en/products/i.imx8-thor96/arrow-development-tools > > Link to 96Boards CE Specification: https://linaro.co/ce-specification > > Signed-off-by: Darshak Patel <darshak.patel@xxxxxxxxxxxxxx> > [Mani: cleaned up for upstream] > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx8mq-thor96.dts | 581 ++++++++++++++++++ > 2 files changed, 582 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 93fce8f0c66d..dec1662019be 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts > new file mode 100644 > index 000000000000..e1adf24c2602 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts > @@ -0,0 +1,581 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2019 Einfochips > + * Copyright 2019 Linaro Ltd. > + */ > + > +/dts-v1/; > + > +#include "imx8mq.dtsi" > + > +/ { > + model = "Einfochips i.MX8MQ Thor96"; > + compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq"; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0x00000000 0x40000000 0 0x80000000>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_leds>; > + > + user-led1 { > + label = "green:user1"; > + gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + user-led2 { > + label = "green:user2"; > + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "none"; I see linux,default-trigger is defined in Documentation/devicetree/bindings/leds/common.txt with given string values. "none" and the following ones are not there. I'm not sure how this works. > + }; > + > + user-led3 { > + label = "green:user3"; > + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "mmc1"; > + default-state = "off"; > + }; > + > + user-led4 { > + label = "green:user4"; > + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; > + panic-indicator; > + linux,default-trigger = "none"; > + }; > + > + wlan-active-led { > + label = "yellow:wlan"; > + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + > + bt-active-led { > + label = "blue:bt"; > + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "hci0-power"; > + default-state = "off"; > + }; > + }; > + > + reg_usdhc1_vmmc: reg-usdhc1-vmmc { > + compatible = "regulator-fixed"; > + regulator-name = "VDD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usdhc1_vqmmc: reg-usdhc1-vqmmc { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_1V8_EXT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + reg_usdhc2_vmmc: reg-usdhc2-vmmc { > + compatible = "regulator-fixed"; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2>; > + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + reg_usdhc2_vqmmc: reg-usdhc2-vqmmc { > + compatible = "regulator-fixed"; > + regulator-name = "NVCC_SD2"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wifi_reg_on>; > + gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; > + }; > +}; > + > +/* LS-SPI0 */ > +&ecspi2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ecspi2>; > + status = "okay"; > +}; > + > +&fec1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_fec1>; > + phy-mode = "rgmii-id"; > + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; > + phy-handle = <ðphy>; > + fsl,magic-packet; > + status = "okay"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy: ethernet-phy@3 { > + compatible = "ethernet-phy-ieee802.3-c22"; > + reg = <3>; > + }; > + }; > +}; > + > +/* LS-I2C0 */ > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + pmic@8 { > + compatible = "fsl,pfuze100"; > + reg = <0x8>; > + > + regulators { > + sw1a_reg: sw1ab { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + }; > + > + sw1c_reg: sw1c { > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1875000>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + sw3a_reg: sw3ab { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <1975000>; > + regulator-always-on; > + }; > + > + sw4_reg: sw4 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-always-on; > + }; > + > + vgen1_reg: vgen1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen2_reg: vgen2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + regulator-always-on; > + }; > + > + vgen3_reg: vgen3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen4_reg: vgen4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vgen5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen6_reg: vgen6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + }; > + }; > + }; > +}; > + > +/* LS-I2C1 */ > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + eeprom: eeprom@50 { > + compatible = "atmel,24c256"; > + reg = <0x50>; > + }; > +}; > + > +/* HS-I2C2 */ > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > +}; > + > +/* HS-I2C3 */ > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > +}; > + > +&pgc_gpu { > + power-supply = <&sw1a_reg>; > +}; > + > +&pgc_vpu { > + power-supply = <&sw1c_reg>; > +}; > + > +&qspi0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_qspi0>; > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + spi-max-frequency = <100000000>; > + reg = <0>; > + }; > +}; > + > +/* Debug UART */ > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; > + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; > + status = "okay"; > +}; > + > +/* LS-UART0 */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; > + fsl,uart-has-rtscts; uart-has-rtscts Shawn > + status = "okay"; > + > + bluetooth { > + compatible = "brcm,bcm43438-bt"; > + device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; > + shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_bt_gpios>; > + }; > +}; > + > +/* LS-UART1 */ > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; > + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; > + status = "okay"; > +}; > + > +&usb3_phy1 { > + status = "okay"; > +}; > + > +&usb_dwc3_1 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +/* SDIO */ > +&usdhc1 { > + #address-cells = <0x1>; > + #size-cells = <0x0>; > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc1>; > + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; > + vmmc-supply = <®_usdhc1_vmmc>; > + vqmmc-supply = <®_usdhc1_vqmmc>; > + mmc-pwrseq = <&sdio_pwrseq>; > + bus-width = <4>; > + non-removable; > + no-sd; > + no-emmc; > + status = "okay"; > + > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +/* uSD */ > +&usdhc2 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; > + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; > + vmmc-supply = <®_usdhc2_vmmc>; > + vqmmc-supply = <®_usdhc2_vqmmc>; > + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + no-sdio; > + no-emmc; > + disable-wp; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_bt_gpios: btgpiosgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 > + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 > + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 > + >; > + }; > + > + pinctrl_ecspi2: ecspi2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x16 > + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x16 > + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x16 > + MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x16 > + >; > + }; > + > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x4 > + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x24 > + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1c > + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1c > + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1c > + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1c > + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 > + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 > + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 > + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 > + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1c > + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 > + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 > + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1c > + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f > + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f > + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f > + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f > + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f > + >; > + }; > + > + pinctrl_leds: ledsgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x19 > + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 > + MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 > + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 > + MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 > + MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 > + >; > + }; > + > + pinctrl_qspi0: qspi0grp { > + fsl,pins = < > + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 > + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 > + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 > + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 > + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 > + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 > + > + >; > + }; > + > + pinctrl_reg_usdhc2: regusdhc2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 > + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 > + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 > + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 > + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 > + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 > + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 > + >; > + }; > + > + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd > + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 > + >; > + }; > + > + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f > + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf > + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf > + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf > + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf > + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf > + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 > + >; > + }; > + > + pinctrl_usdhc2_gpio: usdhc2gpiogrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8c > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcc > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcc > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcc > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcc > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcc > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 > + >; > + }; > + > + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { > + fsl,pins = < > + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9c > + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdc > + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdc > + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdc > + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdc > + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdc > + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xcc > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 > + >; > + }; > + > + pinctrl_wifi_reg_on: wifiregongrp { > + fsl,pins = < > + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x17059 > + >; > + }; > +}; > -- > 2.17.1 >
