The clock controller on Meson8/Meson8b/Meson8m2 has three (known) inputs: - "xtal": the main 24MHz crystal - "ddr_pll": some of the audio clocks use the output of the DDR PLL as input - "clk_32k": an optional clock signal which can be connected to GPIOAO_6 (which then has to be switched to the CLK_32K_IN function) Add the inputs to the documentation so we can wire up these inputs in a follow-up patch. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- .../devicetree/bindings/clock/amlogic,meson8b-clkc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt index 4d94091c1d2d..cc51e4746b3b 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -11,6 +11,11 @@ Required Properties: - "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs - #clock-cells: should be 1. - #reset-cells: should be 1. +- clocks: list of clock phandles, one for each entry in clock-names +- clock-names: should contain the following: + * "xtal": the 24MHz system oscillator + * "ddr_pll": the DDR PLL clock + * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN) Parent node should have the following properties : - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon" -- 2.23.0
