Add emmc and sd card devicetree nodes for SC9863A.
Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
---
arch/arm64/boot/dts/sprd/sc9863a.dtsi | 31 +++++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9863a-1h10.dts | 16 ++++++++++++
2 files changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
index ceecf551fd01..e3ae64cc214a 100644
--- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -626,5 +626,36 @@
};
};
};
+
+ ap-ahb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ sdio0: sdio@20300000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x20300000 0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable";
+ clocks = <&aon_clk CLK_SDIO0_2X>,
+ <&apahb_gate CLK_SDIO0_EB>;
+ assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
+ assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+ };
+
+ sdio3: sdio@20600000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x20600000 0 0x1000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable";
+ clocks = <&aon_clk CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>;
+ assigned-clocks = <&aon_clk CLK_EMMC_2X>;
+ assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
index b6fbb5ca37e1..14673a1e52cb 100644
--- a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -38,3 +38,19 @@
&uart1 {
status = "okay";
};
+
+&sdio0 {
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+ status = "okay";
+};
+
+&sdio3 {
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
--
2.20.1
