Re: [PATCH v7 4/5] arm64: dts: fsl: Add device tree for S32V234-EVB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 16, 2019 at 03:48:26PM +0300, Stefan-Gabriel Mirea wrote:
> From: Stoica Cosmin-Stefan <cosmin.stoica@xxxxxxx>
> 
> Add initial version of device tree for S32V234-EVB, including nodes for the
> 4 Cortex-A53 cores, AIPS bus with UART modules, ARM architected timer and
> Generic Interrupt Controller (GIC).
> 
> Keep SoC level separate from board level to let future boards with this SoC
> share common properties, while the dts files will keep board-dependent
> properties.
> 
> Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@xxxxxxx>
> Signed-off-by: Mihaela Martinas <Mihaela.Martinas@xxxxxxxxxxxxx>
> Signed-off-by: Dan Nica <dan.nica@xxxxxxx>
> Signed-off-by: Larisa Grigore <Larisa.Grigore@xxxxxxx>
> Signed-off-by: Phu Luu An <phu.luuan@xxxxxxx>
> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@xxxxxxx>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   2 +
>  arch/arm64/boot/dts/freescale/s32v234-evb.dts |  25 ++++
>  arch/arm64/boot/dts/freescale/s32v234.dtsi    | 139 ++++++++++++++++++
>  3 files changed, 166 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/s32v234-evb.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/s32v234.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 93fce8f0c66d..730209adb2bc 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -32,3 +32,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> +
> +dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
> new file mode 100644
> index 000000000000..4b802518cefc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2015-2016 Freescale Semiconductor, Inc.
> + * Copyright 2016-2017 NXP
> + */
> +
> +/dts-v1/;
> +#include "s32v234.dtsi"
> +
> +/ {
> +	model = "NXP S32V234-EVB2 Board";
> +	compatible = "fsl,s32v234-evb", "fsl,s32v234";
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
> new file mode 100644
> index 000000000000..37225191ccbf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2015-2016 Freescale Semiconductor, Inc.
> + * Copyright 2016-2018 NXP
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/memreserve/ 0x80000000 0x00010000;
> +
> +/ {
> +	compatible = "fsl,s32v234";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x0>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x0 0x80000000>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x1>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x0 0x80000000>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +		};
> +
> +		cpu2: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x100>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x0 0x80000000>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +		};
> +
> +		cpu3: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x101>;
> +			enable-method = "spin-table";
> +			cpu-release-addr = <0x0 0x80000000>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +		};
> +
> +		cluster0_l2_cache: l2-cache0 {
> +			compatible = "cache";
> +		};
> +
> +		cluster1_l2_cache: l2-cache1 {
> +			compatible = "cache";
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
> +					  IRQ_TYPE_LEVEL_LOW)>;
> +		/* clock-frequency might be modified by u-boot, depending on the
> +		 * chip version.
> +		 */
> +		clock-frequency = <10000000>;
> +	};
> +
> +	gic: interrupt-controller@7d001000 {
> +		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> +		#interrupt-cells = <3>;
> +		#address-cells = <0>;
> +		interrupt-controller;
> +		reg = <0 0x7d001000 0 0x1000>,
> +		      <0 0x7d002000 0 0x2000>,
> +		      <0 0x7d004000 0 0x2000>,
> +		      <0 0x7d006000 0 0x2000>;
> +		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
> +					 IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		interrupt-parent = <&gic>;
> +		ranges;
> +
> +		aips0: aips-bus@40000000 {
> +			compatible = "simple-bus";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			interrupt-parent = <&gic>;
> +			reg = <0x0 0x40000000 0x0 0x7D000>;

We should consistently use lowercase for hex values in device tree.

I fixed it up during applying.

Shawn

> +			ranges;
> +
> +			uart0: serial@40053000 {
> +				compatible = "fsl,s32v234-linflexuart";
> +				reg = <0x0 0x40053000 0x0 0x1000>;
> +				interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		aips1: aips-bus@40080000 {
> +			compatible = "simple-bus";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			interrupt-parent = <&gic>;
> +			reg = <0x0 0x40080000 0x0 0x70000>;
> +			ranges;
> +
> +			uart1: serial@400bc000 {
> +				compatible = "fsl,s32v234-linflexuart";
> +				reg = <0x0 0x400bc000 0x0 0x1000>;
> +				interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +};
> -- 
> 2.22.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux