> Am 25.10.2019 um 23:13 schrieb Rob Herring <robh@xxxxxxxxxx>:
>
> On Sat, Oct 19, 2019 at 08:41:16PM +0200, H. Nikolaus Schaller wrote:
>> The standard method for sdio devices connected to
>> an sdio interface is to define them as a child node
>> like we can see with wlcore.
>>
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> Acked-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
>> ---
>> .../bindings/net/wireless/ti,wl1251.txt | 26 +++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
>> index bb2fcde6f7ff..88612ff29f2d 100644
>> --- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
>> +++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
>> @@ -35,3 +35,29 @@ Examples:
>> ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
>> };
>> };
>> +
>> +&mmc3 {
>> + vmmc-supply = <&wlan_en>;
>> +
>> + bus-width = <4>;
>> + non-removable;
>> + ti,non-removable;
>> + cap-power-off-card;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc3_pins>;
>
> None of the above are really relevant to this binding.
Ok, but how and where do we document that they are needed to make both ends of the interface work together?
>
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + wlan: wl1251@1 {
>
> wifi@1
Ok.
>
>> + compatible = "ti,wl1251";
>> +
>> + reg = <1>;
>> +
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_21 */
>> +
>> + ti,wl1251-has-eeprom;
>> + };
>> +};
>> --
>> 2.19.1
>>
BR and thanks,
Nikolaus
