On Thu, Oct 24, 2019 at 09:51:04AM -0500, Rob Herring wrote:
> On Thu, Oct 24, 2019 at 9:22 AM Ayan Halder <Ayan.Halder@xxxxxxx> wrote:
Hi Bob,
Thanks for your quick response.
> >
> >
> > Hi Folks,
> >
> > I have a question regarding "reserved-memory". I am using an Arm Juno
> > platform which has a chunk of ram in its fpga. I intend to make this
> > memory as reserved so that it can be shared between various devices
> > for passing framebuffer.
> >
> > My dts looks like the following:-
> >
> > / {
> > .... // some nodes
> >
> > tlx@60000000 {
> > compatible = "simple-bus";
> > ...
> >
> > juno_wrapper {
> >
> > ... /* here we have all the nodes */
> > /* corresponding to the devices in the fpga */
> >
> > memory@d000000 {
> > device_type = "memory";
> > reg = <0x00 0x60000000 0x00 0x8000000>;
> > };
> >
> > reserved-memory {
> > #address-cells = <0x01>;
> > #size-cells = <0x01>;
> > ranges;
> >
> > framebuffer@d000000 {
> > compatible = "shared-dma-pool";
> > linux,cma-default;
> > reusable;
> > reg = <0x00 0x60000000 0x00 0x8000000>;
> > phandle = <0x44>;
> > };
> > };
> > ...
> > }
> > }
> > ...
> > }
> >
> > Note that the depth of the "reserved-memory" node is 3.
> >
> > Refer __fdt_scan_reserved_mem() :-
> >
> > if (!found && depth == 1 && strcmp(uname, "reserved-memory") == 0) {
> >
> > if (__reserved_mem_check_root(node) != 0) {
> > pr_err("Reserved memory: unsupported node
> > format, ignoring\n");
> > /* break scan */
> > return 1;
> > }
> > found = 1;
> >
> > /* scan next node */
> > return 0;
> > }
> >
> > It expects the "reserved-memory" node to be at depth == 1 and so it
> > does not probe it in our case.
> >
> > Niether from the
> > Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> > nor from commit - e8d9d1f5485b52ec3c4d7af839e6914438f6c285,
> > I could understand the reason for such restriction.
> >
> > So, I seek the community's advice as to whether I should fix up
> > __fdt_scan_reserved_mem() so as to do away with the restriction or
> > put the "reserved-memory" node outside of 'tlx@60000000' (which looks
> > logically incorrect as the memory is on the fpga platform).
>
> For now, I'm going to say it must be at the root level.
Can you mention it in the Documentation/.../reserved-memory.txt,
please?
> I'd guess the
> memory@d000000 node is also just ignored (wrong unit-address BTW).
I would request you to ignore the address for the time being. In
juno_wrapper{}, we have a complex remapping of addresses of all the
sub-devices. I deliberately did not put that in the snippet, so as to
prevent any distraction from the core issue.
>
> I think you're also forgetting the later unflattened parsing of
> /reserved-memory.
Are you talking about the remaining part of the
__fdt_scan_reserved_mem() ie
....
} else if (found && depth < 2) {
/* scanning of /reserved-memory has been finished */
return 1;
}
if (!of_fdt_device_is_available(initial_boot_params, node))
return 0;
err = __reserved_mem_reserve_reg(node, uname);
if (err == -ENOENT && of_get_flat_dt_prop(node, "size", NULL))
fdt_reserved_mem_save_node(node, uname, 0, 0);
/* scan next node */
return 0;
If so, I agree with you that it needs to be changed as well (if we
were to do away with the restriction).
> The other complication IIRC is booting with UEFI
> does it's own reserved memory table which often uses the DT table as
> its source.
I have no knowledge of UEFI booting. So if UEFI expects
"reserved-memory" nodes to be at root level, then we must adhere to
the restriction. :)
Ayan
>
> Rob
