fec driver: ethernet rx is deaf on variscite imx6ul board

[Oliver Graute <oliver.graute@xxxxxxxxx>]

Hello,

I use the following nodes in my devicetree to get two ethernet ports
working with fec driver on a Variscite DART-6UL SoM Board (imx6ul).

But ethernet RX is deaf and not working. Some clue whats is the issue
here? 

Best regards,

Oliver

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "rmii";
	phy-reset-gpios = <&gpio5 0 1>;
	phy-reset-duration = <100>;
	phy-handle = <&ethphy0>;
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet2>;
	phy-mode = "rmii";
	phy-handle = <&ethphy1>;
	phy-reset-gpios = <&gpio1 10 1>;
	phy-reset-duration = <100>;

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			micrel,rmii-reference-clock-select-25-mhz;
			clocks = <&clk_rmii_ref>;
			clock-names = "rmii-ref";
			reg = <1>;
		};

		ethphy1: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			micrel,rmii-reference-clock-select-25-mhz;
			clocks = <&clk_rmii_ref>;
			clock-names = "rmii-ref";
			reg = <3>;
		};
	};
};
	pinctrl_enet1: enet1grp {
		fsl,pins = <
			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
		>;
	};

	pinctrl_enet2: enet2grp {
		fsl,pins = <
			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x1b0b0
		>;
	};