Re: [PATCH] ARM: dts: bcm: HR2: add label to sp805 watchdog

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: Re: [PATCH] ARM: dts: bcm: HR2: add label to sp805 watchdog
From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Date: Wed, 23 Oct 2019 10:42:25 -0700
Cc: devicetree@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, Scott Branden <sbranden@xxxxxxxxxxxx>
In-reply-to: <20191022221956.10746-1-chris.packham@alliedtelesis.co.nz>

On Wed, 23 Oct 2019 11:19:56 +1300, Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:
> This allows boards the option of adding properties or disabling the
> watchdog entirely.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---

Applied to devicetree/next, thanks!
--
Florian

References:
- [PATCH] ARM: dts: bcm: HR2: add label to sp805 watchdog
  - From: Chris Packham

Prev by Date: Re: [PATCH] ARM: dts: zynq: enablement of coresight topology
Next by Date: [PATCH] ARM: dts: Configure omap3 rng
Previous by thread: [PATCH] ARM: dts: bcm: HR2: add label to sp805 watchdog
Next by thread: [PATCH RFC 0/2] irqchip/gic: Allow the use of SGI interrupts
Index(es):
- Date
- Thread

[Index of Archives] [Device Tree Compilter] [Device Tree Spec] [Linux Driver Backports] [Video for Linux] [Linux USB Devel] [Linux PCI Devel] [Linux Audio Users] [Linux Kernel] [Linux SCSI] [XFree86] [Yosemite Backpacking]

Powered by Linux