Add initial support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3-W+ SiP with 8 (2 x 4) GiB of RAM. The memory map is as follows: - Bank0: 4GiB RAM : 0x000048000000 -> 0x000bfffffff 0x000480000000 -> 0x004ffffffff - Bank1: 4GiB RAM : 0x000600000000 -> 0x006ffffffff Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@xxxxxxxxxxx>. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- v2: - Add Reviewed-by, Tested-by. --- arch/arm64/boot/dts/renesas/Makefile | 1 + .../boot/dts/renesas/r8a77961-salvator-xs.dts | 31 +++++++++++++++++++ 2 files changed, 32 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 937a3e4c3fadebb3..8fdbd2267384186b 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts new file mode 100644 index 0000000000000000..4abd78ac1cd597d9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+ + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77961"; + compatible = "renesas,salvator-xs", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; -- 2.17.1