Hello Jeff,
On Tue, Oct 22, 2019 at 09:45:25PM -0500, Jeff LaBundy wrote:
> On Tue, Oct 22, 2019 at 08:54:15AM +0200, Uwe Kleine-König wrote:
> > On Mon, Oct 21, 2019 at 11:36:49PM -0500, Jeff LaBundy wrote:
> > > On Mon, Oct 21, 2019 at 09:34:19AM +0200, Uwe Kleine-König wrote:
> > > > > +{
> > > > > + struct iqs620_pwm_private *iqs620_pwm;
> > > > > + struct iqs62x_core *iqs62x;
> > > > > + int error;
> > > > > + int duty_calc = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS - 1;
> > > > > + u8 duty_clamp = clamp(duty_calc, 0, 0xFF);
> >
> > Another problem that we have here is that the period is fixed to 1 ms
> > and if a consumer requests for example:
> >
> > .period = 5000000,
> > .duty_cycle = 1000000,
> >
> > the hardware is actually configured for
> >
> > .period = 1000000,
> > .duty_cycle = 1000000,
> >
> > . I don't have a good suggestion how to fix this. We'd need to
> > draw a line somewhere and decline a request that is too far from the
> > result. But where this line should be is not obvious, it should
> > definitively not be implemented in the driver itself IMHO.
> >
> > (The only halfway sane approach would be to let lowlevel drivers
> > implement a .round_state callback and then let the framework judge. But
> > we're a long way from having that, so that's not a solution for today.)
> >
>
> Agreed on all counts. For now, I will mention in the 'Limitations' heading that
> the period cannot be adjusted.
Ack. My longterm plan is to require .apply_state() to round down both
.period and .duty_cycle. This isn't wrong already today, so I suggest
you decline a request to set the period to something smaller than 1 ms
with an error code. (I think most drivers use -EINVAL here, conceptually
-EDOM might be sensible. I'd stick to EINVAL for now.)
> > > > > + iqs620_pwm = container_of(chip, struct iqs620_pwm_private, chip);
> > > > > + iqs62x = iqs620_pwm->iqs62x;
> > > > > +
> > > > > + error = regmap_write(iqs62x->map, IQS620_PWM_DUTY_CYCLE, duty_clamp);
> > > > > + if (error)
> > > > > + return error;
> > > > > +
> > > > > + state->period = IQS620_PWM_PERIOD_NS;
> > > > > + state->duty_cycle = (duty_clamp + 1) * IQS620_PWM_PERIOD_NS / 256;
> > > >
> > > > This suggests that if the value in the IQS620_PWM_DUTY_CYCLE is 0 the
> > > > duty cycle is 1/256 ms with a period of 1 ms and the output cannot be
> > > > constant inactive. If this is right please add a paragraph in the
> > > > driver's comment at the top:
> > > >
> > > > * Limitations:
> > > > * - The hardware cannot generate a 0% duty cycle
> > > >
> > > > (Please stick to this format, other drivers use it, too.)
> > >
> > > That's correct; the lowest duty cycle that can be achieved using only the
> > > IQS620_PWM_DUTY_CYCLE register is 0.4%. We can, however, generate 0% duty
> > > cycle by disabling the output altogether using a separate register. Would
> > > that be better than flat-out saying it's impossible?
> >
> > There is (maybe) a small difference between disabled and 0% duty cycle,
> > at least from the framework's POV: If you do:
> >
> > pwm_apply_state(pwm, { .enabled = true, .period = 1000000, .duty_cycle = 1000000, });
> > pwm_apply_state(pwm, { .enabled = false, .period = $DC, .duty_cycle = $DC, });
> > pwm_apply_state(pwm, { .enabled = true, .period = 1000000, .duty_cycle = 1000000, });
> >
> > and compare it to the expected result of
> >
> > pwm_apply_state(pwm, { .enabled = true, .period = 1000000, .duty_cycle = 1000000, });
> > pwm_apply_state(pwm, { .enabled = true, .period = 1000000, .duty_cycle = 0, });
> > pwm_apply_state(pwm, { .enabled = true, .period = 1000000, .duty_cycle = 1000000, });
> >
> > the difference is that the duration of the inactive phase in the latter
> > case is a multiple of 1 ms.
> >
> > There is no policy for lowlevel drivers what to do, but disabling when
> > 0% is requested is at least not unseen and probably more what consumers
> > expect.
> >
>
> With the change I am proposing, the output will be driven to zero if enabled = false
> OR duty_cycle < 4000 ns. Stated another way:
>
> enable duty_cycle IQS620_PWR_SETTINGS[7] IQS620_PWM_DUTY_CYCLE
> ------ ---------- ---------------------- ---------------------
> 0 don't care 0 don't care
> 1 0 ... 3999 0 don't care
> 1 4000 ... x 1 0
> 1 x+1 ... y 1 1
>
> ...and so on. For context, if IQS620_PWR_SETTINGS[7] = 0 then the output is held to
> zero. If IQS620_PWR_SETTINGS[7] = 1 then the output toggles at a duty cycle between
> 0.4% and 100% as a function of IQS620_PWM_DUTY_CYCLE.
Your table isn't accurate. IQS620_PWM_DUTY_CYCLE=0 results in a
duty_cycle of 3906.25 ns so the table should look as follows:
enable duty_cycle IQS620_PWR_SETTINGS[7] IQS620_PWM_DUTY_CYCLE
------ ------------ ---------------------- ---------------------
0 don't care 0 don't care
1 [0, 3906] 0 don't care
1 [3907, 7812] 1 0
1 [7813,11718] 1 1
In general:
dc = state->duty_cycle * 256 / 1000000
if state->enabled == false or dc == 0:
IQS620_PWR_SETTINGS[7] = 0
else:
IQS620_PWM_DUTY_CYCLE = min(dc - 1, 0xff)
IQS620_PWR_SETTINGS[7] = 1
> Based on how the device behaves in response to its two available
> registers, I think your two examples will appear equal, but please let
> me know if I have understood.
Yeah, that's the expectation.
With the rounding as I suggested above this yields strange effects like
if
.period = 1 s, .duty_cycle = 0.5 s
is requested you end up in
.period = 1 ms, .duty_cycle = 1 ms
but I think there is nothing we can reasonably do about this.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
