[PATCH 3/9] ARM: dts: imx6qdl-apf6: add phy to fec

[Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx>]

Add the mdio bus and the phy to the fec-node.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx>
---
 arch/arm/boot/dts/imx6qdl-apf6.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 10981c74c90d..37cbdfd4fb33 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -11,7 +11,21 @@
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
 };
 
 /* Bluetooth */
-- 
2.21.0