Hi,
On 16/10/2019 14:31, Kishon Vijay Abraham I wrote:
TI's J721E SoC uses Cadence Sierra SERDES for USB, PCIe and SGMII.
TI has a wrapper named WIZ to control input signals to Sierra and
Torrent SERDES.
This patch series:
1) Add support to WIZ module present in TI's J721E SoC
2) Adapt Cadence Sierra PHY driver to be used for J721E SoC
Anil Varughese (1):
phy: cadence: Sierra: Configure both lane cdb and common cdb registers
for external SSC
Kishon Vijay Abraham I (12):
dt-bindings: phy: Sierra: Add bindings for Sierra in TI's J721E
phy: cadence: Sierra: Make "phy_clk" and "sierra_apb" optional
resources
phy: cadence: Sierra: Use "regmap" for read and write to Sierra
registers
phy: cadence: Sierra: Add support for SERDES_16G used in J721E SoC
phy: cadence: Sierra: Make cdns_sierra_phy_init() as phy_ops
phy: cadence: Sierra: Modify register macro names to be in sync with
Sierra user guide
phy: cadence: Sierra: Get reset control "array" for each link
phy: cadence: Sierra: Check for PLL lock during PHY power on
phy: cadence: Sierra: Change MAX_LANES of Sierra to 16
phy: cadence: Sierra: Set cmn_refclk/cmn_refclk1 frequency to 25MHz
dt-bindings: phy: Document WIZ (SERDES wrapper) bindings
phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
Tested USB3.0 on J7ES using this series.
Tested-by: Roger Quadros <rogerq@xxxxxx>
.../bindings/phy/phy-cadence-sierra.txt | 13 +-
.../bindings/phy/ti,phy-j721e-wiz.txt | 95 ++
drivers/phy/cadence/phy-cadence-sierra.c | 695 +++++++++++---
drivers/phy/ti/Kconfig | 15 +
drivers/phy/ti/Makefile | 1 +
drivers/phy/ti/phy-j721e-wiz.c | 904 ++++++++++++++++++
6 files changed, 1585 insertions(+), 138 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
create mode 100644 drivers/phy/ti/phy-j721e-wiz.c
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
