On Mon, Oct 21, 2019 at 07:38:07AM +0200, Oleksij Rempel wrote:
> +static void ag71xx_mac_validate(struct phylink_config *config,
> + unsigned long *supported,
> + struct phylink_link_state *state)
> {
> - struct ag71xx *ag = netdev_priv(ndev);
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> +
> + if (state->interface != PHY_INTERFACE_MODE_NA &&
> + state->interface != PHY_INTERFACE_MODE_GMII &&
> + state->interface != PHY_INTERFACE_MODE_MII) {
> + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> + return;
> + }
> +
> + phylink_set(mask, MII);
> +
> + /* flow control is not supported */
> +
> + phylink_set(mask, 10baseT_Half);
> + phylink_set(mask, 10baseT_Full);
> + phylink_set(mask, 100baseT_Half);
> + phylink_set(mask, 100baseT_Full);
>
> - ag71xx_link_adjust(ag, true);
> + if (state->interface == PHY_INTERFACE_MODE_NA &&
> + state->interface == PHY_INTERFACE_MODE_GMII) {
This is always false.
Apart from that, from just reading the patch I have no further concerns.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
