On Mon, Oct 21, 2019 at 1:19 AM Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
>
> Hi Robert,
>
> same here, don't name it 'ARM: dt: ...' instead name it 'ARM: dts: imx:
> ventana: ..' or 'ARM: dts: imx: imx6qdl-gw553x: ..'.
Sorry about that, I'll follow that format from now on.
>
> On 19-10-18 16:21, Robert Jones wrote:
> > Add one node for the accel/gyro i2c device and another for the separate
> > magnetometer device in the lsm9ds1.
> >
> > Signed-off-by: Robert Jones <rjones@xxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++++++
> > 1 file changed, 31 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> > index a106689..55e6922 100644
> > --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
> > @@ -173,6 +173,25 @@
> > pinctrl-0 = <&pinctrl_i2c2>;
> > status = "okay";
> >
> > + lsm9ds1_ag@6a {
> > + compatible = "st,lsm9ds1-imu";
>
> Didn't found this compatible string.
So this is a compatible string for a driver that's being mainlined
now. The devicetree bindings for which has already been reviewed-by
Rob Herring as seen here:
https://www.spinics.net/lists/linux-iio/msg47297.html. If possible I'd
prefer to get this in the same kernel release so let me know if
there's anything else I can do to make that happen.
>
> > + reg = <0x6a>;
> > + st,drdy-int-pin = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_acc_gyro>;
> > + interrupt-parent = <&gpio7>;
> > + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > + lsm9ds1_m@1c {
> > + compatible = "st,lsm9ds1-magn";
> > + reg = <0x1c>;
>
> Nodes are sorted according their i2c-addresses.
>
I'll resubmit with that change, thanks!
- Bobby
> Regards,
> Marco
>
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_mag>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <2 IRQ_TYPE_EDGE_RISING>;
> > + };
> > +
> > ltc3676: pmic@3c {
> > compatible = "lltc,ltc3676";
> > reg = <0x3c>;
> > @@ -462,6 +481,18 @@
> > >;
> > };
> >
> > + pinctrl_acc_gyro: acc_gyrogrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
> > + >;
> > + };
> > +
> > + pinctrl_mag: maggrp {
> > + fsl,pins = <
> > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> > + >;
> > + };
> > +
> > pinctrl_pps: ppsgrp {
> > fsl,pins = <
> > MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
> > --
> > 2.9.2
> >
> >
> >
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
