Hi Stephen,
On Tue, Sep 17, 2019 at 09:47:44PM -0700, Stephen Boyd wrote:
> Quoting Manivannan Sadhasivam (2019-09-16 09:14:46)
> > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > index 801fa1cd0321..e70c64e43ff9 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -139,6 +139,13 @@ config COMMON_CLK_SI570
> > This driver supports Silicon Labs 570/571/598/599 programmable
> > clock generators.
> >
> > +config COMMON_CLK_BM1880
> > + bool "Clock driver for Bitmain BM1880 SoC"
>
> Can it be tristate?
>
I would prefer to have the common clock drivers as built-in since they
are the most fundamental parts of the system.
> > + depends on ARCH_BITMAIN || COMPILE_TEST
> > + default ARCH_BITMAIN
> > + help
> > + This driver supports the clocks on Bitmain BM1880 SoC.
> > +
> > config COMMON_CLK_CDCE706
> > tristate "Clock driver for TI CDCE706 clock synthesizer"
> > depends on I2C
> > diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
> > new file mode 100644
> > index 000000000000..3b10de929fd4
> > --- /dev/null
> > +++ b/drivers/clk/clk-bm1880.c
> > @@ -0,0 +1,966 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Bitmain BM1880 SoC clock driver
> > + *
> > + * Copyright (c) 2019 Linaro Ltd.
> > + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#include <dt-bindings/clock/bm1880-clock.h>
> > +
> > +#define BM1880_CLK_MPLL_CTL 0x00
> > +#define BM1880_CLK_SPLL_CTL 0x04
> > +#define BM1880_CLK_FPLL_CTL 0x08
> > +#define BM1880_CLK_DDRPLL_CTL 0x0c
> > +
> > +#define BM1880_CLK_ENABLE0 0x00
> > +#define BM1880_CLK_ENABLE1 0x04
> > +#define BM1880_CLK_SELECT 0x20
> > +#define BM1880_CLK_DIV0 0x40
> > +#define BM1880_CLK_DIV1 0x44
> > +#define BM1880_CLK_DIV2 0x48
> > +#define BM1880_CLK_DIV3 0x4c
> > +#define BM1880_CLK_DIV4 0x50
> > +#define BM1880_CLK_DIV5 0x54
> > +#define BM1880_CLK_DIV6 0x58
> > +#define BM1880_CLK_DIV7 0x5c
> > +#define BM1880_CLK_DIV8 0x60
> > +#define BM1880_CLK_DIV9 0x64
> > +#define BM1880_CLK_DIV10 0x68
> > +#define BM1880_CLK_DIV11 0x6c
> > +#define BM1880_CLK_DIV12 0x70
> > +#define BM1880_CLK_DIV13 0x74
> > +#define BM1880_CLK_DIV14 0x78
> > +#define BM1880_CLK_DIV15 0x7c
> > +#define BM1880_CLK_DIV16 0x80
> > +#define BM1880_CLK_DIV17 0x84
> > +#define BM1880_CLK_DIV18 0x88
> > +#define BM1880_CLK_DIV19 0x8c
> > +#define BM1880_CLK_DIV20 0x90
> > +#define BM1880_CLK_DIV21 0x94
> > +#define BM1880_CLK_DIV22 0x98
> > +#define BM1880_CLK_DIV23 0x9c
> > +#define BM1880_CLK_DIV24 0xa0
> > +#define BM1880_CLK_DIV25 0xa4
> > +#define BM1880_CLK_DIV26 0xa8
> > +#define BM1880_CLK_DIV27 0xac
> > +#define BM1880_CLK_DIV28 0xb0
> > +
> > +#define to_bm1880_pll_clk(_hw) container_of(_hw, struct bm1880_pll_hw_clock, hw)
> > +#define to_bm1880_div_clk(_hw) container_of(_hw, struct bm1880_div_hw_clock, hw)
> > +
> > +static DEFINE_SPINLOCK(bm1880_clk_lock);
> > +
> > +struct bm1880_clock_data {
> > + void __iomem *pll_base;
> > + void __iomem *sys_base;
> > + struct clk_hw_onecell_data *clk_data;
>
> Please call it hw_data or onecell_data instead so that the code doesn't
> read as clk_data->clk_data. Also, probably can just make it part of the
> same struct instead of a pointer inside so that it can all be allocated
> in one big chunk instead of in two.
>
okay.
> > +};
> > +
> > +struct bm1880_gate_clock {
> > + unsigned int id;
> > + const char *name;
> > + const char *parent;
> > + u32 gate_reg;
> > + s8 gate_shift;
> > + unsigned long flags;
> > +};
> > +
> > +struct bm1880_mux_clock {
> > + unsigned int id;
> > + const char *name;
> > + const char * const *parents;
> > + s8 num_parents;
> > + u32 reg;
> > + s8 shift;
> > + unsigned long flags;
> > +};
> > +
> > +struct bm1880_div_clock {
> > + unsigned int id;
> > + const char *name;
> > + u32 reg;
> > + u8 shift;
> > + u8 width;
> > + u32 initval;
> > + const struct clk_div_table *table;
> > + unsigned long flags;
> > +};
> > +
> > +struct bm1880_div_hw_clock {
> > + struct bm1880_div_clock div;
> > + void __iomem *base;
> > + spinlock_t *lock;
> > + struct clk_hw hw;
> > + struct clk_init_data init;
> > +};
> > +
> > +struct bm1880_composite_clock {
> > + unsigned int id;
> > + const char *name;
> > + const char *parent;
> > + const char * const *parents;
> > + unsigned int num_parents;
> > + unsigned long flags;
> > +
> > + u32 gate_reg;
> > + u32 mux_reg;
> > + u32 div_reg;
> > +
> > + s8 gate_shift;
> > + s8 mux_shift;
> > + s8 div_shift;
> > + s8 div_width;
> > + s16 div_initval;
> > + const struct clk_div_table *table;
> > +};
> > +
> > +struct bm1880_pll_clock {
> > + unsigned int id;
> > + const char *name;
> > + u32 reg;
> > + unsigned long flags;
> > +};
> > +
> > +struct bm1880_pll_hw_clock {
> > + struct bm1880_pll_clock pll;
> > + void __iomem *base;
> > + struct clk_hw hw;
> > + struct clk_init_data init;
> > +};
> > +
> > +static const struct clk_ops bm1880_pll_ops;
> > +static const struct clk_ops bm1880_clk_div_ops;
> > +
> > +#define GATE_DIV(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
> > + _div_shift, _div_width, _div_initval, _table, \
> > + _flags) { \
> > + .id = _id, \
> > + .parent = _parent, \
> > + .name = _name, \
> > + .gate_reg = _gate_reg, \
> > + .gate_shift = _gate_shift, \
> > + .div_reg = _div_reg, \
> > + .div_shift = _div_shift, \
> > + .div_width = _div_width, \
> > + .div_initval = _div_initval, \
> > + .table = _table, \
> > + .mux_shift = -1, \
> > + .flags = _flags, \
> > + }
> > +
> > +#define GATE_MUX(_id, _name, _parents, _gate_reg, _gate_shift, \
> > + _mux_reg, _mux_shift, _flags) { \
> > + .id = _id, \
> > + .parents = _parents, \
> > + .num_parents = ARRAY_SIZE(_parents), \
> > + .name = _name, \
> > + .gate_reg = _gate_reg, \
> > + .gate_shift = _gate_shift, \
> > + .div_shift = -1, \
> > + .mux_reg = _mux_reg, \
> > + .mux_shift = _mux_shift, \
> > + .flags = _flags, \
> > + }
> > +
> > +#define CLK_PLL(_id, _name, _parent, _reg, _flags) { \
> > + .pll.id = _id, \
> > + .pll.name = _name, \
> > + .pll.reg = _reg, \
> > + .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, \
> > + &bm1880_pll_ops, \
> > + _flags), \
> > + }
> > +
> > +#define CLK_DIV(_id, _name, _parent, _reg, _shift, _width, _initval, \
> > + _table, _flags) { \
> > + .div.id = _id, \
> > + .div.name = _name, \
> > + .div.reg = _reg, \
> > + .div.shift = _shift, \
> > + .div.width = _width, \
> > + .div.initval = _initval, \
> > + .div.table = _table, \
> > + .hw.init = CLK_HW_INIT_HW(_name, _parent, \
> > + &bm1880_clk_div_ops, \
> > + _flags), \
> > + }
> > +
> > +static struct clk_parent_data bm1880_pll_parent[] = {
> > + { .fw_name = "osc", .name = "osc" },
> > +};
> > +
> > +/*
> > + * All PLL clocks are marked as CRITICAL, hence they are very crucial
> > + * for the functioning of the SoC
>
> Please add more information besides crucial to function of the clk.
> Basically describe what the PLLs are clocking and why those child clks
> aren't enabled or marked as critical themselves. The usage of
> CLK_IS_CRITICAL is too liberal in this driver so this needs to be
> cleaned up. For example, clk_mpll shouldn't be marked critical, just the
> a53 CPU clk that can source from it should be marked critical because
> it's for the CPU running code.
okay. I got into the assumption that we should explicitly mark the parent
clocks as critical also. But yeah, this doesn't makes much sense...
> It's also odd that we would register gate
> clks or the a53 clks if we don't expect to ever turn those clks off. Can
> that be avoided so that we don't need to mark anything critical for this
> path?
>
No. I would like to implement the whole logic provided by the IP as it is.
Eventhough it looks odd, that's how things are designed ;-)
> > + */
> > +static struct bm1880_pll_hw_clock bm1880_pll_clks[] = {
> > + CLK_PLL(BM1880_CLK_MPLL, "clk_mpll", bm1880_pll_parent,
> > + BM1880_CLK_MPLL_CTL, CLK_IS_CRITICAL),
> > + CLK_PLL(BM1880_CLK_SPLL, "clk_spll", bm1880_pll_parent,
> > + BM1880_CLK_SPLL_CTL, CLK_IS_CRITICAL),
> > + CLK_PLL(BM1880_CLK_FPLL, "clk_fpll", bm1880_pll_parent,
> > + BM1880_CLK_FPLL_CTL, CLK_IS_CRITICAL),
> > + CLK_PLL(BM1880_CLK_DDRPLL, "clk_ddrpll", bm1880_pll_parent,
> > + BM1880_CLK_DDRPLL_CTL, CLK_IS_CRITICAL),
> > +};
> > +
> > +/*
> > + * Clocks marked as CRITICAL are needed for the proper functioning
> > + * of the SoC.
> > + */
> > +static const struct bm1880_gate_clock bm1880_gate_clks[] = {
> > + { BM1880_CLK_AHB_ROM, "clk_ahb_rom", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 2, CLK_IS_CRITICAL },
> > + { BM1880_CLK_AXI_SRAM, "clk_axi_sram", "clk_axi1",
> > + BM1880_CLK_ENABLE0, 3, CLK_IS_CRITICAL },
> > + { BM1880_CLK_DDR_AXI, "clk_ddr_axi", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 4, CLK_IS_CRITICAL },
> > + { BM1880_CLK_APB_EFUSE, "clk_apb_efuse", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 6, CLK_IS_CRITICAL },
> > + { BM1880_CLK_AXI5_EMMC, "clk_axi5_emmc", "clk_axi5",
> > + BM1880_CLK_ENABLE0, 7, 0 },
> > + { BM1880_CLK_AXI5_SD, "clk_axi5_sd", "clk_axi5",
> > + BM1880_CLK_ENABLE0, 10, 0 },
> > + { BM1880_CLK_AXI4_ETH0, "clk_axi4_eth0", "clk_axi4",
> > + BM1880_CLK_ENABLE0, 14, 0 },
> > + { BM1880_CLK_AXI4_ETH1, "clk_axi4_eth1", "clk_axi4",
> > + BM1880_CLK_ENABLE0, 16, 0 },
> > + { BM1880_CLK_AXI1_GDMA, "clk_axi1_gdma", "clk_axi1",
> > + BM1880_CLK_ENABLE0, 17, 0 },
> > + /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
> > + { BM1880_CLK_APB_GPIO, "clk_apb_gpio", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 18, CLK_IGNORE_UNUSED },
> > + { BM1880_CLK_APB_GPIO_INTR, "clk_apb_gpio_intr", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 19, CLK_IGNORE_UNUSED },
> > + { BM1880_CLK_AXI1_MINER, "clk_axi1_miner", "clk_axi1",
> > + BM1880_CLK_ENABLE0, 21, 0 },
> > + { BM1880_CLK_AHB_SF, "clk_ahb_sf", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 22, 0 },
> > + { BM1880_CLK_SDMA_AXI, "clk_sdma_axi", "clk_axi5",
> > + BM1880_CLK_ENABLE0, 23, 0 },
> > + { BM1880_CLK_APB_I2C, "clk_apb_i2c", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 25, 0 },
> > + { BM1880_CLK_APB_WDT, "clk_apb_wdt", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE0, 26, 0 },
> > + { BM1880_CLK_APB_JPEG, "clk_apb_jpeg", "clk_axi6",
> > + BM1880_CLK_ENABLE0, 27, 0 },
> > + { BM1880_CLK_AXI5_NF, "clk_axi5_nf", "clk_axi5",
> > + BM1880_CLK_ENABLE0, 29, 0 },
> > + { BM1880_CLK_APB_NF, "clk_apb_nf", "clk_axi6",
> > + BM1880_CLK_ENABLE0, 30, 0 },
> > + { BM1880_CLK_APB_PWM, "clk_apb_pwm", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE1, 0, 0 },
> > + { BM1880_CLK_RV, "clk_rv", "clk_mux_rv",
> > + BM1880_CLK_ENABLE1, 1, 0 },
> > + { BM1880_CLK_APB_SPI, "clk_apb_spi", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE1, 2, 0 },
> > + { BM1880_CLK_UART_500M, "clk_uart_500m", "clk_div_uart_500m",
> > + BM1880_CLK_ENABLE1, 4, 0 },
> > + { BM1880_CLK_APB_UART, "clk_apb_uart", "clk_axi6",
> > + BM1880_CLK_ENABLE1, 5, 0 },
> > + { BM1880_CLK_APB_I2S, "clk_apb_i2s", "clk_axi6",
> > + BM1880_CLK_ENABLE1, 6, 0 },
> > + { BM1880_CLK_AXI4_USB, "clk_axi4_usb", "clk_axi4",
> > + BM1880_CLK_ENABLE1, 7, 0 },
> > + { BM1880_CLK_APB_USB, "clk_apb_usb", "clk_axi6",
> > + BM1880_CLK_ENABLE1, 8, 0 },
> > + { BM1880_CLK_12M_USB, "clk_12m_usb", "clk_div_12m_usb",
> > + BM1880_CLK_ENABLE1, 11, 0 },
> > + { BM1880_CLK_APB_VIDEO, "clk_apb_video", "clk_axi6",
> > + BM1880_CLK_ENABLE1, 12, 0 },
> > + { BM1880_CLK_APB_VPP, "clk_apb_vpp", "clk_axi6",
> > + BM1880_CLK_ENABLE1, 15, 0 },
> > + { BM1880_CLK_AXI6, "clk_axi6", "clk_mux_axi6",
> > + BM1880_CLK_ENABLE1, 21, CLK_IS_CRITICAL },
> > +};
> > +
> > +static const char * const clk_a53_parents[] = { "clk_spll", "clk_mpll" };
> > +static const char * const clk_rv_parents[] = { "clk_div_1_rv", "clk_div_0_rv" };
> > +static const char * const clk_axi1_parents[] = { "clk_div_1_axi1", "clk_div_0_axi1" };
> > +static const char * const clk_axi6_parents[] = { "clk_div_1_axi6", "clk_div_0_axi6" };
>
> I sent some patches to make the basic clk types support the new way of
> specifying parents. Can you use those patches instead of listing all
> these strings?
>
Yeah, I just noticed after sending out these patches. But I'd like to adapt
them later due to that fact that it will require some rework to this driver
and I don't have time to do it currently :(
I'll send incremental patches later once this gets in!
> > +
> > +static const struct bm1880_mux_clock bm1880_mux_clks[] = {
> > + { BM1880_CLK_MUX_RV, "clk_mux_rv", clk_rv_parents, 2,
> > + BM1880_CLK_SELECT, 1, 0 },
> > + { BM1880_CLK_MUX_AXI6, "clk_mux_axi6", clk_axi6_parents, 2,
> > + BM1880_CLK_SELECT, 3, 0 },
> > +};
> > +
> > +static const struct clk_div_table bm1880_div_table_0[] = {
> > + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
> > + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
> > + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
> > + { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
> > + { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
> > + { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
> > + { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
> > + { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
> > + { 0, 0 }
> > +};
> > +
> > +static const struct clk_div_table bm1880_div_table_1[] = {
> > + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
> > + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
> > + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
> > + { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
> > + { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
> > + { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
> > + { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
> > + { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
> > + { 127, 128 }, { 0, 0 }
> > +};
> > +
> > +static const struct clk_div_table bm1880_div_table_2[] = {
> > + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
> > + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
> > + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
> > + { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
> > + { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
> > + { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
> > + { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
> > + { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
> > + { 127, 128 }, { 255, 256 }, { 0, 0 }
> > +};
> > +
> > +static const struct clk_div_table bm1880_div_table_3[] = {
> > + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
> > + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
> > + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
> > + { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
> > + { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
> > + { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
> > + { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
> > + { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
> > + { 127, 128 }, { 255, 256 }, { 511, 512 }, { 0, 0 }
> > +};
> > +
> > +static const struct clk_div_table bm1880_div_table_4[] = {
> > + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
> > + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
> > + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
> > + { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
> > + { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
> > + { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
> > + { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
> > + { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
> > + { 127, 128 }, { 255, 256 }, { 511, 512 }, { 65535, 65536 },
> > + { 0, 0 }
> > +};
> > +
> > +/*
> > + * Clocks marked as CRITICAL are needed for the proper functioning
> > + * of the SoC.
> > + */
> > +static struct bm1880_div_hw_clock bm1880_div_clks[] = {
> > + CLK_DIV(BM1880_CLK_DIV_0_RV, "clk_div_0_rv", &bm1880_pll_clks[1].hw,
> > + BM1880_CLK_DIV12, 16, 5, 1, bm1880_div_table_0, 0),
> > + CLK_DIV(BM1880_CLK_DIV_1_RV, "clk_div_1_rv", &bm1880_pll_clks[2].hw,
> > + BM1880_CLK_DIV13, 16, 5, 1, bm1880_div_table_0, 0),
> > + CLK_DIV(BM1880_CLK_DIV_UART_500M, "clk_div_uart_500m", &bm1880_pll_clks[2].hw,
> > + BM1880_CLK_DIV15, 16, 7, 3, bm1880_div_table_1, 0),
> > + CLK_DIV(BM1880_CLK_DIV_0_AXI1, "clk_div_0_axi1", &bm1880_pll_clks[0].hw,
> > + BM1880_CLK_DIV21, 16, 5, 2, bm1880_div_table_0,
> > + CLK_IS_CRITICAL),
> > + CLK_DIV(BM1880_CLK_DIV_1_AXI1, "clk_div_1_axi1", &bm1880_pll_clks[2].hw,
> > + BM1880_CLK_DIV22, 16, 5, 3, bm1880_div_table_0,
> > + CLK_IS_CRITICAL),
> > + CLK_DIV(BM1880_CLK_DIV_0_AXI6, "clk_div_0_axi6", &bm1880_pll_clks[2].hw,
> > + BM1880_CLK_DIV27, 16, 5, 15, bm1880_div_table_0,
> > + CLK_IS_CRITICAL),
> > + CLK_DIV(BM1880_CLK_DIV_1_AXI6, "clk_div_1_axi6", &bm1880_pll_clks[0].hw,
> > + BM1880_CLK_DIV28, 16, 5, 11, bm1880_div_table_0,
> > + CLK_IS_CRITICAL),
> > + CLK_DIV(BM1880_CLK_DIV_12M_USB, "clk_div_12m_usb", &bm1880_pll_clks[2].hw,
> > + BM1880_CLK_DIV18, 16, 7, 125, bm1880_div_table_1, 0),
> > +};
> > +
> > +/*
> > + * Clocks marked as CRITICAL are all needed for the proper functioning
> > + * of the SoC.
> > + */
> > +static struct bm1880_composite_clock bm1880_composite_clks[] = {
> > + GATE_MUX(BM1880_CLK_A53, "clk_a53", clk_a53_parents,
> > + BM1880_CLK_ENABLE0, 0, BM1880_CLK_SELECT, 0,
> > + CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_50M_A53, "clk_50m_a53", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 1, BM1880_CLK_DIV0, 16, 5, 30,
> > + bm1880_div_table_0, CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_EFUSE, "clk_efuse", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 5, BM1880_CLK_DIV1, 16, 7, 60,
> > + bm1880_div_table_1, 0),
> > + GATE_DIV(BM1880_CLK_EMMC, "clk_emmc", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 8, BM1880_CLK_DIV2, 16, 5, 15,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_100K_EMMC, "clk_100k_emmc", "clk_div_12m_usb",
> > + BM1880_CLK_ENABLE0, 9, BM1880_CLK_DIV3, 16, 8, 120,
> > + bm1880_div_table_2, 0),
> > + GATE_DIV(BM1880_CLK_SD, "clk_sd", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 11, BM1880_CLK_DIV4, 16, 5, 15,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_100K_SD, "clk_100k_sd", "clk_div_12m_usb",
> > + BM1880_CLK_ENABLE0, 12, BM1880_CLK_DIV5, 16, 8, 120,
> > + bm1880_div_table_2, 0),
> > + GATE_DIV(BM1880_CLK_500M_ETH0, "clk_500m_eth0", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 13, BM1880_CLK_DIV6, 16, 5, 3,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_500M_ETH1, "clk_500m_eth1", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 15, BM1880_CLK_DIV7, 16, 5, 3,
> > + bm1880_div_table_0, 0),
> > + /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
> > + GATE_DIV(BM1880_CLK_GPIO_DB, "clk_gpio_db", "clk_div_12m_usb",
> > + BM1880_CLK_ENABLE0, 20, BM1880_CLK_DIV8, 16, 16, 120,
> > + bm1880_div_table_4, CLK_IGNORE_UNUSED),
> > + GATE_DIV(BM1880_CLK_SDMA_AUD, "clk_sdma_aud", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 24, BM1880_CLK_DIV9, 16, 7, 61,
> > + bm1880_div_table_1, 0),
> > + GATE_DIV(BM1880_CLK_JPEG_AXI, "clk_jpeg_axi", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 28, BM1880_CLK_DIV10, 16, 5, 4,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_NF, "clk_nf", "clk_fpll",
> > + BM1880_CLK_ENABLE0, 31, BM1880_CLK_DIV11, 16, 5, 30,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_TPU_AXI, "clk_tpu_axi", "clk_spll",
> > + BM1880_CLK_ENABLE1, 3, BM1880_CLK_DIV14, 16, 5, 1,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_125M_USB, "clk_125m_usb", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 9, BM1880_CLK_DIV16, 16, 5, 12,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_33K_USB, "clk_33k_usb", "clk_div_12m_usb",
> > + BM1880_CLK_ENABLE1, 10, BM1880_CLK_DIV17, 16, 9, 363,
> > + bm1880_div_table_3, 0),
> > + GATE_DIV(BM1880_CLK_VIDEO_AXI, "clk_video_axi", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 13, BM1880_CLK_DIV19, 16, 5, 4,
> > + bm1880_div_table_0, 0),
> > + GATE_DIV(BM1880_CLK_VPP_AXI, "clk_vpp_axi", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 14, BM1880_CLK_DIV20, 16, 5, 4,
> > + bm1880_div_table_0, 0),
> > + GATE_MUX(BM1880_CLK_AXI1, "clk_axi1", clk_axi1_parents,
> > + BM1880_CLK_ENABLE1, 15, BM1880_CLK_SELECT, 2,
> > + CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_AXI2, "clk_axi2", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 17, BM1880_CLK_DIV23, 16, 5, 3,
> > + bm1880_div_table_0, CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_AXI3, "clk_axi3", "clk_mux_rv",
> > + BM1880_CLK_ENABLE1, 18, BM1880_CLK_DIV24, 16, 5, 2,
> > + bm1880_div_table_0, CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_AXI4, "clk_axi4", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 19, BM1880_CLK_DIV25, 16, 5, 6,
> > + bm1880_div_table_0, CLK_IS_CRITICAL),
> > + GATE_DIV(BM1880_CLK_AXI5, "clk_axi5", "clk_fpll",
> > + BM1880_CLK_ENABLE1, 20, BM1880_CLK_DIV26, 16, 5, 15,
> > + bm1880_div_table_0, CLK_IS_CRITICAL),
> > +};
> > +
> > +static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate)
> > +{
> > + u32 fbdiv, fref, refdiv;
> > + u32 postdiv1, postdiv2;
> > + unsigned long rate, numerator, denominator;
> > +
> > + fbdiv = (regval >> 16) & 0xfff;
> > + fref = parent_rate;
> > + refdiv = regval & 0x1f;
> > + postdiv1 = (regval >> 8) & 0x7;
> > + postdiv2 = (regval >> 12) & 0x7;
> > +
> > + numerator = parent_rate * fbdiv;
> > + denominator = refdiv * postdiv1 * postdiv2;
> > + do_div(numerator, denominator);
> > + rate = numerator;
> > +
> > + return rate;
> > +}
> > +
> > +static unsigned long bm1880_pll_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
> > + unsigned long rate;
> > + u32 regval;
> > +
> > + regval = readl(pll_hw->base + pll_hw->pll.reg);
> > + rate = bm1880_pll_rate_calc(regval, parent_rate);
> > +
> > + return rate;
> > +}
> > +
> > +static const struct clk_ops bm1880_pll_ops = {
> > + .recalc_rate = bm1880_pll_recalc_rate,
> > +};
> > +
> > +static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_clk,
> > + void __iomem *sys_base)
> > +{
> > + struct clk_hw *hw;
> > + int err;
> > +
> > + pll_clk->base = sys_base;
> > + hw = &pll_clk->hw;
> > +
> > + err = clk_hw_register(NULL, hw);
> > + if (err)
> > + return ERR_PTR(err);
> > +
> > + return hw;
> > +}
> > +
> > +static void bm1880_clk_unregister_pll(struct clk_hw *hw)
> > +{
> > + struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
> > +
> > + clk_hw_unregister(hw);
> > + kfree(pll_hw);
> > +}
> > +
> > +static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
> > + int num_clks, struct bm1880_clock_data *data)
> > +{
> > + struct clk_hw *hw;
> > + void __iomem *pll_base = data->pll_base;
> > + int i;
> > +
> > + for (i = 0; i < num_clks; i++) {
> > + struct bm1880_pll_hw_clock *bm1880_clk = &clks[i];
> > +
> > + hw = bm1880_clk_register_pll(bm1880_clk, pll_base);
> > + if (IS_ERR(hw)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, bm1880_clk->pll.name);
> > + goto err_clk;
> > + }
> > +
> > + data->clk_data->hws[clks[i].pll.id] = hw;
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + while (i--)
> > + bm1880_clk_unregister_pll(data->clk_data->hws[clks[i].pll.id]);
> > +
> > + return PTR_ERR(hw);
> > +}
> > +
> > +static int bm1880_clk_register_mux(const struct bm1880_mux_clock *clks,
> > + int num_clks, struct bm1880_clock_data *data)
> > +{
> > + struct clk_hw *hw;
> > + void __iomem *sys_base = data->sys_base;
> > + int i;
> > +
> > + for (i = 0; i < num_clks; i++) {
> > + hw = clk_hw_register_mux(NULL, clks[i].name,
> > + clks[i].parents,
> > + clks[i].num_parents,
> > + clks[i].flags,
> > + sys_base + clks[i].reg,
> > + clks[i].shift, 1, 0,
> > + &bm1880_clk_lock);
> > + if (IS_ERR(hw)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, clks[i].name);
> > + goto err_clk;
> > + }
> > +
> > + data->clk_data->hws[clks[i].id] = hw;
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + while (i--)
> > + clk_hw_unregister_mux(data->clk_data->hws[clks[i].id]);
> > +
> > + return PTR_ERR(hw);
> > +}
> > +
> > +static unsigned long bm1880_clk_div_recalc_rate(struct clk_hw *hw,
> > + unsigned long parent_rate)
> > +{
> > + struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
> > + struct bm1880_div_clock *div = &div_hw->div;
> > + void __iomem *reg_addr = div_hw->base + div->reg;
> > + unsigned int val;
> > + unsigned long rate;
> > +
> > + if (!(readl(reg_addr) & BIT(3))) {
> > + val = div->initval;
> > + } else {
> > + val = readl(reg_addr) >> div->shift;
> > + val &= clk_div_mask(div->width);
> > + }
> > +
> > + rate = divider_recalc_rate(hw, parent_rate, val, div->table,
> > + div->flags, div->width);
> > +
> > + return rate;
> > +}
> > +
> > +static long bm1880_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long *prate)
> > +{
> > + struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
> > + struct bm1880_div_clock *div = &div_hw->div;
> > + void __iomem *reg_addr = div_hw->base + div->reg;
> > +
> > + if (div->flags & CLK_DIVIDER_READ_ONLY) {
> > + u32 val;
> > +
> > + val = readl(reg_addr) >> div->shift;
> > + val &= clk_div_mask(div->width);
> > +
> > + return divider_ro_round_rate(hw, rate, prate, div->table,
> > + div->width, div->flags,
> > + val);
> > + }
> > +
> > + return divider_round_rate(hw, rate, prate, div->table,
> > + div->width, div->flags);
> > +}
> > +
> > +static int bm1880_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> > + unsigned long parent_rate)
> > +{
> > + struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
> > + struct bm1880_div_clock *div = &div_hw->div;
> > + void __iomem *reg_addr = div_hw->base + div->reg;
> > + unsigned long flags = 0;
> > + int value;
> > + u32 val;
> > +
> > + value = divider_get_val(rate, parent_rate, div->table,
> > + div->width, div_hw->div.flags);
> > + if (value < 0)
> > + return value;
> > +
> > + if (div_hw->lock)
> > + spin_lock_irqsave(div_hw->lock, flags);
> > + else
> > + __acquire(div_hw->lock);
> > +
> > + if (div->flags & CLK_DIVIDER_HIWORD_MASK) {
>
> Is this used by your driver? As far as I can recall it was a
> rockchip/hisilicon specific thing that hasn't happened since.
>
Actually, this is used by the underlying IP but not currently used in BM1880.
So, I can remove it. We can add it once the corresponding SoC is added.
> > + val = clk_div_mask(div->width) << (div_hw->div.shift + 16);
> > + } else {
> > + val = readl(reg_addr);
> > + val &= ~(clk_div_mask(div->width) << div_hw->div.shift);
> > + }
> > + val |= (u32)value << div->shift;
> > + writel(val, reg_addr);
> > +
> > + if (div_hw->lock)
> > + spin_unlock_irqrestore(div_hw->lock, flags);
> > + else
> > + __release(div_hw->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct clk_ops bm1880_clk_div_ops = {
> > + .recalc_rate = bm1880_clk_div_recalc_rate,
> > + .round_rate = bm1880_clk_div_round_rate,
> > + .set_rate = bm1880_clk_div_set_rate,
> > +};
> > +
> > +static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_clk,
> > + void __iomem *sys_base)
> > +{
> > + struct clk_hw *hw;
> > + int err;
> > +
> > + div_clk->div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
> > + div_clk->base = sys_base;
> > + div_clk->lock = &bm1880_clk_lock;
> > +
> > + hw = &div_clk->hw;
> > + err = clk_hw_register(NULL, hw);
> > + if (err)
> > + return ERR_PTR(err);
> > +
> > + return hw;
> > +}
> > +
> > +static void bm1880_clk_unregister_div(struct clk_hw *hw)
> > +{
> > + struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
> > +
> > + clk_hw_unregister(hw);
> > + kfree(div_hw);
> > +}
> > +
> > +static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
> > + int num_clks, struct bm1880_clock_data *data)
> > +{
> > + struct clk_hw *hw;
> > + void __iomem *sys_base = data->sys_base;
> > + int i;
> > +
> > + for (i = 0; i < num_clks; i++) {
> > + struct bm1880_div_hw_clock *bm1880_clk = &clks[i];
> > +
> > + hw = bm1880_clk_register_div(bm1880_clk, sys_base);
> > + if (IS_ERR(hw)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, bm1880_clk->div.name);
> > + goto err_clk;
> > + }
> > +
> > + data->clk_data->hws[clks[i].div.id] = hw;
>
> This line is overly complicated. Please use local variables.
>
Ack.
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + while (i--)
> > + bm1880_clk_unregister_div(data->clk_data->hws[clks[i].div.id]);
> > +
> > + return PTR_ERR(hw);
> > +}
> > +
> > +static int bm1880_clk_register_gate(const struct bm1880_gate_clock *clks,
> > + int num_clks, struct bm1880_clock_data *data)
> > +{
> > + struct clk_hw *hw;
> > + void __iomem *sys_base = data->sys_base;
> > + int i;
> > +
> > + for (i = 0; i < num_clks; i++) {
> > + hw = clk_hw_register_gate(NULL, clks[i].name,
> > + clks[i].parent,
> > + clks[i].flags,
> > + sys_base + clks[i].gate_reg,
> > + clks[i].gate_shift,
> > + 0,
> > + &bm1880_clk_lock);
>
> Weird tabs here.
>
Ack.
> > + if (IS_ERR(hw)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, clks[i].name);
> > + goto err_clk;
> > + }
> > +
> > + data->clk_data->hws[clks[i].id] = hw;
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + while (i--)
> > + clk_hw_unregister_gate(data->clk_data->hws[clks[i].id]);
> > +
> > + return PTR_ERR(hw);
> > +}
> > +
> > +static struct clk_hw *bm1880_clk_register_composite(struct bm1880_composite_clock *clks,
> > + void __iomem *sys_base)
> > +{
> > + struct clk_hw *hw;
> > + struct clk_mux *mux = NULL;
> > + struct clk_gate *gate = NULL;
> > + struct bm1880_div_hw_clock *div_hws = NULL;
> > + struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
> > + const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
> > + const char * const *parent_names;
> > + const char *parent;
> > + int num_parents;
> > + int ret;
> > +
> > + if (clks->mux_shift >= 0) {
> > + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> > + if (!mux)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + mux->reg = sys_base + clks->mux_reg;
> > + mux->mask = 1;
> > + mux->shift = clks->mux_shift;
> > + mux_hw = &mux->hw;
> > + mux_ops = &clk_mux_ops;
> > + mux->lock = &bm1880_clk_lock;
> > +
> > + parent_names = clks->parents;
> > + num_parents = clks->num_parents;
> > + } else {
> > + parent = clks->parent;
> > + parent_names = &parent;
> > + num_parents = 1;
> > + }
> > +
> > + if (clks->gate_shift >= 0) {
> > + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> > + if (!gate) {
> > + ret = -ENOMEM;
> > + goto err_out;
> > + }
> > +
> > + gate->reg = sys_base + clks->gate_reg;
> > + gate->bit_idx = clks->gate_shift;
> > + gate->lock = &bm1880_clk_lock;
> > +
> > + gate_hw = &gate->hw;
> > + gate_ops = &clk_gate_ops;
> > + }
> > +
> > + if (clks->div_shift >= 0) {
> > + div_hws = kzalloc(sizeof(*div_hws), GFP_KERNEL);
> > + if (!div_hws) {
> > + ret = -ENOMEM;
> > + goto err_out;
> > + }
> > +
> > + div_hws->base = sys_base;
> > + div_hws->div.reg = clks->div_reg;
> > + div_hws->div.shift = clks->div_shift;
> > + div_hws->div.width = clks->div_width;
> > + div_hws->div.table = clks->table;
> > + div_hws->div.initval = clks->div_initval;
> > + div_hws->lock = &bm1880_clk_lock;
> > + div_hws->div.flags = CLK_DIVIDER_ONE_BASED |
> > + CLK_DIVIDER_ALLOW_ZERO;
> > +
> > + div_hw = &div_hws->hw;
> > + div_ops = &bm1880_clk_div_ops;
> > + }
> > +
> > + hw = clk_hw_register_composite(NULL, clks->name, parent_names,
> > + num_parents, mux_hw, mux_ops, div_hw,
> > + div_ops, gate_hw, gate_ops,
> > + clks->flags);
> > +
>
> All of these need to be removed on probe failure. Any plans to do so?
>
Removing the composite clocks during failure is handled one level up, in
bm1880_clk_register_composites().
> > + if (IS_ERR(hw)) {
> > + ret = PTR_ERR(hw);
> > + goto err_out;
> > + }
> > +
> > + return hw;
> > +
> > +err_out:
> > + kfree(div_hws);
> > + kfree(gate);
> > + kfree(mux);
> > +
> > + return ERR_PTR(ret);
> > +}
> > +
> > +static int bm1880_clk_register_composites(struct bm1880_composite_clock *clks,
> > + int num_clks, struct bm1880_clock_data *data)
> > +{
> > + struct clk_hw *hw;
> > + void __iomem *sys_base = data->sys_base;
> > + int i;
> > +
> > + for (i = 0; i < num_clks; i++) {
> > + struct bm1880_composite_clock *bm1880_clk = &clks[i];
> > +
> > + hw = bm1880_clk_register_composite(bm1880_clk, sys_base);
> > + if (IS_ERR(hw)) {
> > + pr_err("%s: failed to register clock %s\n",
> > + __func__, bm1880_clk->name);
> > + goto err_clk;
> > + }
> > +
> > + data->clk_data->hws[clks[i].id] = hw;
> > + }
> > +
> > + return 0;
> > +
> > +err_clk:
> > + while (i--)
> > + clk_hw_unregister_composite(data->clk_data->hws[clks[i].id]);
> > +
> > + return PTR_ERR(hw);
> > +}
> > +
> > +static int bm1880_clk_probe(struct platform_device *pdev)
> > +{
> > + struct bm1880_clock_data *clk_data;
> > + void __iomem *pll_base, *sys_base;
> > + struct device_node *np = pdev->dev.of_node;
> > + struct device *dev = &pdev->dev;
> > + struct resource *res;
> > + struct clk_hw_onecell_data *clk_hw_data;
> > + int num_clks, i;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + pll_base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(pll_base))
> > + return PTR_ERR(pll_base);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> > + sys_base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(sys_base))
> > + return PTR_ERR(sys_base);
> > +
> > + clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
> > + if (!clk_data)
> > + return -ENOMEM;
> > +
> > + clk_data->pll_base = pll_base;
> > + clk_data->sys_base = sys_base;
> > +
> > + num_clks = ARRAY_SIZE(bm1880_pll_clks) +
> > + ARRAY_SIZE(bm1880_div_clks) +
> > + ARRAY_SIZE(bm1880_mux_clks) +
> > + ARRAY_SIZE(bm1880_composite_clks) +
> > + ARRAY_SIZE(bm1880_gate_clks);
> > +
> > + clk_hw_data = devm_kzalloc(&pdev->dev, struct_size(clk_hw_data, hws,
> > + num_clks), GFP_KERNEL);
> > + if (!clk_hw_data)
> > + return -ENOMEM;
> > +
> > + clk_data->clk_data = clk_hw_data;
> > +
> > + for (i = 0; i < num_clks; i++)
> > + clk_data->clk_data->hws[i] = ERR_PTR(-ENOENT);
> > +
> > + clk_data->clk_data->num = num_clks;
> > +
> > + bm1880_clk_register_plls(bm1880_pll_clks,
> > + ARRAY_SIZE(bm1880_pll_clks),
> > + clk_data);
> > +
> > + bm1880_clk_register_divs(bm1880_div_clks,
> > + ARRAY_SIZE(bm1880_div_clks),
> > + clk_data);
> > +
> > + bm1880_clk_register_mux(bm1880_mux_clks,
> > + ARRAY_SIZE(bm1880_mux_clks),
> > + clk_data);
> > +
> > + bm1880_clk_register_composites(bm1880_composite_clks,
> > + ARRAY_SIZE(bm1880_composite_clks),
> > + clk_data);
> > +
> > + bm1880_clk_register_gate(bm1880_gate_clks,
> > + ARRAY_SIZE(bm1880_gate_clks),
> > + clk_data);
> > +
> > + return of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
>
> Can you use devm_of_clk_add_hw_provider()?
>
okay.
Thanks,
Mani
> > + clk_data->clk_data);
> > +}
