With a wl1251 child node of mmc3 in the device tree decoded
in omap_hsmmc.c to handle special wl1251 initialization, we do
no longer need to instantiate the mmc3 through pdata quirks.
We also can remove the wlan regulator and reset/interrupt definitions
and do them through device tree.
Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.7.0
---
arch/arm/mach-omap2/pdata-quirks.c | 93 ------------------------------
1 file changed, 93 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 89734ef9ab1e..ecc1ef632951 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -303,108 +303,15 @@ static void __init omap3_logicpd_torpedo_init(void)
}
/* omap3pandora legacy devices */
-#define PANDORA_WIFI_IRQ_GPIO 21
-#define PANDORA_WIFI_NRESET_GPIO 23
static struct platform_device pandora_backlight = {
.name = "pandora-backlight",
.id = -1,
};
-static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
-};
-
-static struct regulator_init_data pandora_vmmc3 = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
- .consumer_supplies = pandora_vmmc3_supply,
-};
-
-static struct fixed_voltage_config pandora_vwlan = {
- .supply_name = "vwlan",
- .microvolts = 1800000, /* 1.8V */
- .gpio = PANDORA_WIFI_NRESET_GPIO,
- .startup_delay = 50000, /* 50ms */
- .enable_high = 1,
- .init_data = &pandora_vmmc3,
-};
-
-static struct platform_device pandora_vwlan_device = {
- .name = "reg-fixed-voltage",
- .id = 1,
- .dev = {
- .platform_data = &pandora_vwlan,
- },
-};
-
-static void pandora_wl1251_init_card(struct mmc_card *card)
-{
- /*
- * We have TI wl1251 attached to MMC3. Pass this information to
- * SDIO core because it can't be probed by normal methods.
- */
- if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
- card->quirks |= MMC_QUIRK_NONSTD_SDIO;
- card->cccr.wide_bus = 1;
- card->cis.vendor = 0x104c;
- card->cis.device = 0x9066;
- card->cis.blksize = 512;
- card->cis.max_dtr = 24000000;
- card->ocr = 0x80;
- }
-}
-
-static struct omap2_hsmmc_info pandora_mmc3[] = {
- {
- .mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .init_card = pandora_wl1251_init_card,
- },
- {} /* Terminator */
-};
-
-static void __init pandora_wl1251_init(void)
-{
- struct wl1251_platform_data pandora_wl1251_pdata;
- int ret;
-
- memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
-
- pandora_wl1251_pdata.power_gpio = -1;
-
- ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
- if (ret < 0)
- goto fail;
-
- pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
- if (pandora_wl1251_pdata.irq < 0)
- goto fail_irq;
-
- pandora_wl1251_pdata.use_eeprom = true;
- ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
- if (ret < 0)
- goto fail_irq;
-
- return;
-
-fail_irq:
- gpio_free(PANDORA_WIFI_IRQ_GPIO);
-fail:
- pr_err("wl1251 board initialisation failed\n");
-}
-
static void __init omap3_pandora_legacy_init(void)
{
platform_device_register(&pandora_backlight);
- platform_device_register(&pandora_vwlan_device);
- omap_hsmmc_init(pandora_mmc3);
- omap_hsmmc_late_init(pandora_mmc3);
- pandora_wl1251_init();
}
#endif /* CONFIG_ARCH_OMAP3 */
--
2.19.1
