Re: [PATCH] arm64: dts: ti: k3-am654-base-board: Add disable-wp for mmc0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/10/2019 14:42, Faiz Abbas wrote:
MMC0_SDWP is not connected to the card. Indicate this by adding a
disable-wp flag.

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
  arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
  1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1102b84f853d..143474119328 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -221,6 +221,7 @@
  	bus-width = <8>;
  	non-removable;
  	ti,driver-strength-ohm = <50>;
+	disable-wp;
  };
&dwc3_1 {


Queuing up towards 5.5, thanks.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux