Re: [PATCH v3 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



czw., 17 paź 2019 o 20:31 Rob Herring <robh@xxxxxxxxxx> napisał(a):
>
> On Thu, Oct 17, 2019 at 09:12:29AM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> >
> > Convert the binding document for MAX77650 core MFD module to YAML.
> >
> > Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/mfd/max77650.txt      |  46 ------
> >  .../devicetree/bindings/mfd/max77650.yaml     | 151 ++++++++++++++++++
> >  2 files changed, 151 insertions(+), 46 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/mfd/max77650.txt
> >  create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
> > deleted file mode 100644
> > index b529d8d19335..000000000000
> > --- a/Documentation/devicetree/bindings/mfd/max77650.txt
> > +++ /dev/null
> > @@ -1,46 +0,0 @@
> > -MAX77650 ultra low-power PMIC from Maxim Integrated.
> > -
> > -Required properties:
> > --------------------
> > -- compatible:                Must be "maxim,max77650"
> > -- reg:                       I2C device address.
> > -- interrupts:                The interrupt on the parent the controller is
> > -                     connected to.
> > -- interrupt-controller: Marks the device node as an interrupt controller.
> > -- #interrupt-cells:  Must be <2>.
> > -
> > -- gpio-controller:   Marks the device node as a gpio controller.
> > -- #gpio-cells:               Must be <2>. The first cell is the pin number and
> > -                     the second cell is used to specify the gpio active
> > -                     state.
> > -
> > -Optional properties:
> > ---------------------
> > -gpio-line-names:     Single string containing the name of the GPIO line.
> > -
> > -The GPIO-controller module is represented as part of the top-level PMIC
> > -node. The device exposes a single GPIO line.
> > -
> > -For device-tree bindings of other sub-modules (regulator, power supply,
> > -LEDs and onkey) refer to the binding documents under the respective
> > -sub-system directories.
> > -
> > -For more details on GPIO bindings, please refer to the generic GPIO DT
> > -binding document <devicetree/bindings/gpio/gpio.txt>.
> > -
> > -Example:
> > ---------
> > -
> > -     pmic@48 {
> > -             compatible = "maxim,max77650";
> > -             reg = <0x48>;
> > -
> > -             interrupt-controller;
> > -             interrupt-parent = <&gpio2>;
> > -             #interrupt-cells = <2>;
> > -             interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > -
> > -             gpio-controller;
> > -             #gpio-cells = <2>;
> > -             gpio-line-names = "max77650-charger";
> > -     };
> > diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > new file mode 100644
> > index 000000000000..66a447e1cf56
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > @@ -0,0 +1,151 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/max77650.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MAX77650 ultra low-power PMIC from Maxim Integrated.
> > +
> > +maintainers:
> > +  - Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> > +
> > +description: |
> > +  This document describes the DT properties of the core MFD controller.
>
> So does every file in this directory.
>
> Describe what this chip is.
>
> > +
> > +  The GPIO-controller module is represented as part of the top-level PMIC
> > +  node. The device exposes a single GPIO line.
> > +
> > +  For device-tree bindings of other sub-modules (regulator, power supply,
> > +  LEDs and onkey) refer to the binding documents under the respective
> > +  sub-system directories.
> > +
> > +  For more details on GPIO bindings, please refer to the generic GPIO DT
> > +  binding document <devicetree/bindings/gpio/gpio.txt>.
>
> Also fairly useless and another reference to maintain...
>
> > +
> > +properties:
> > +  compatible:
> > +    const: maxim,max77650
> > +
> > +  reg:
> > +    description:
> > +      I2C device address.
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> > +  "#interrupt-cells":
> > +    const: 2
> > +    description:
> > +      The first cell is the IRQ number, the second cell is the trigger type.
> > +
> > +  gpio-controller: true
> > +
> > +  "#gpio-cells":
> > +    const: 2
> > +    description:
> > +      The first cell is the pin number and the second cell is used to specify
> > +      the gpio active state.
> > +
> > +  gpio-line-names:
> > +    maxItems: 1
> > +    description:
> > +      Single string containing the name of the GPIO line.
> > +
> > +  regulators:
> > +    $ref: ../regulator/max77650-regulator.yaml
>
> Not bisectable... This patch needs to come last.
>
> > +
> > +  charger:
> > +    $ref: ../power/supply/max77650-charger.yaml
> > +
> > +  leds:
> > +    $ref: ../leds/leds-max77650.yaml
> > +
> > +  onkey:
> > +    $ref: ../input/max77650-onkey.yaml
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-controller
> > +  - "#interrupt-cells"
> > +  - gpio-controller
> > +  - "#gpio-cells"
>
> None of the child nodes are required?
>

Technically no, and now when I think about it, neither are the
following two properties really:

  - gpio-controller
  - "#gpio-cells"

You can define an empty device, it's just going to be useless. For
practical purposes you can use any combination of modules, so I
wouldn't make any of them required.

Bart

> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/input/linux-event-codes.h>
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        pmic@48 {
> > +            compatible = "maxim,max77650";
> > +            reg = <0x48>;
> > +
> > +            interrupt-controller;
> > +            interrupt-parent = <&gpio2>;
> > +            #interrupt-cells = <2>;
> > +            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +            gpio-controller;
> > +            #gpio-cells = <2>;
> > +            gpio-line-names = "max77650-charger";
> > +
> > +            regulators {
> > +                compatible = "maxim,max77650-regulator";
> > +
> > +                max77650_ldo: regulator@0 {
> > +                    regulator-compatible = "ldo";
> > +                    regulator-name = "max77650-ldo";
> > +                    regulator-min-microvolt = <1350000>;
> > +                    regulator-max-microvolt = <2937500>;
> > +                };
> > +
> > +                max77650_sbb0: regulator@1 {
> > +                    regulator-compatible = "sbb0";
> > +                    regulator-name = "max77650-sbb0";
> > +                    regulator-min-microvolt = <800000>;
> > +                    regulator-max-microvolt = <1587500>;
> > +                };
> > +            };
> > +
> > +            charger {
> > +                compatible = "maxim,max77650-charger";
> > +                input-voltage-min-microvolt = <4200000>;
> > +                input-current-limit-microamp = <285000>;
> > +            };
> > +
> > +            leds {
> > +                compatible = "maxim,max77650-led";
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +
> > +                led@0 {
> > +                    reg = <0>;
> > +                    label = "blue:usr0";
> > +                };
> > +
> > +                led@1 {
> > +                    reg = <1>;
> > +                    label = "red:usr1";
> > +                    linux,default-trigger = "heartbeat";
> > +                };
> > +
> > +                led@2 {
> > +                    reg = <2>;
> > +                    label = "green:usr2";
> > +                };
> > +            };
> > +
> > +            onkey {
> > +                compatible = "maxim,max77650-onkey";
> > +                linux,code = <KEY_END>;
> > +                maxim,onkey-slide;
> > +            };
> > +        };
> > +    };
> > --
> > 2.23.0
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux