czw., 17 paź 2019 o 21:24 Rob Herring <robh@xxxxxxxxxx> napisał(a): > > On Thu, Oct 17, 2019 at 04:10:50PM +1300, Chris Packham wrote: > > This GPIO controller is present on a number of Broadcom switch ASICs > > with integrated SoCs. It is similar to the nsp-gpio and iproc-gpio > > blocks but different enough to require a separate driver. > > > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > > --- > > > > Notes: > > Changes in v2: > > - Document as DT schema > > - Include ngpios, #gpio-cells and gpio-controller properties > > > > .../bindings/gpio/brcm,xgs-iproc.yaml | 83 +++++++++++++++++++ > > 1 file changed, 83 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml > > > > diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml > > new file mode 100644 > > index 000000000000..71998551209e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.yaml > > @@ -0,0 +1,83 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/gpio/brcm,xgs-iproc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Broadcom XGS iProc GPIO controller > > + > > +maintainers: > > + - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > > + > > +description: | > > + This controller is the Chip Common A GPIO present on a number of Broadcom > > + switch ASICs with integrated SoCs. > > + > > +properties: > > + compatible: > > + enum: > > + - brcm,iproc-gpio-cca > > enum vs. const usage depends on whether you think you'll add more > compatibles. > What if you don't know yet? For instance we use a const compatible and then a new chip is released for which we can reuse the driver? Is this something that is expected to remain stable in the binding document? The question is unrelated to this patch, I'm just unsure about my own approach to writing yaml bindings. Bart > > + > > + reg: > > + minItems: 2 > > + maxItems: 2 > > + description: > > + The first region defines the base I/O address containing > > + the GPIO controller registers. The second region defines > > + the I/O address containing the Chip Common A interrupt > > + registers. > > items: > - description: the I/O address containing the GPIO controller > registers > - description: the I/O address containing the Chip Common A interrupt > registers > > And minItems/maxItems can be implicit. > > > + > > + gpio-controller: true > > + > > + '#gpio-cells': > > + const: 2 > > + > > + ngpios: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > Common property, doesn't need a type definition. Also, it would have to > be under an 'allOf' to actually work. > > > + minimum: 0 > > + maximum: 32 > > + > > + interrupt-controller: > > + type: boolean > > Just 'interrupt-controller: true' > > > + > > + '#interrupt-cells': > > + const: 2 > > + > > + interrupts: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - "#gpio-cells" > > + - gpio-controller > > + > > +allOf: > > + - if: > > + properties: > > + interrupt-controller: > > + contains: > > + const: true > > + then: > > + required: > > + - interrupts > > + - '#interrupt-cells' > > This is mostly handled in the core schema already and 'dependencies' > works better for this anyways. All you need here is: > > dependencies: > interrupt-controller: [ interrupts ] > > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + gpio@18000060 { > > + compatible = "brcm,iproc-gpio-cca"; > > + #gpio-cells = <2>; > > + reg = <0x18000060 0x50>, > > + <0x18000000 0x50>; > > + ngpios = <12>; > > + gpio-controller; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; > > + }; > > + > > + > > +... > > -- > > 2.23.0 > >
