As of commit 362b334b17943d84 ("ARM: dts: r8a7791: Convert to new
CPG/MSSR bindings"), all upstream R-Car Gen2 device tree source files
use the unified "Renesas Clock Pulse Generator / Module Standby and
Software Reset" DT bindings.
Hence remove the old R-Car Gen2 DT bindings describing a hierarchical
representation of the various CPG and MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in clk-renesas-for-v5.5.
The abovementioned commit was part of the v4.15 release.
The conversion was backported to v4.14.75-ltsi, and included in any
R-Car BSP based on v4.14 (rcar-3.6.0 and later).
---
.../clock/renesas,rcar-gen2-cpg-clocks.txt | 60 -------------------
1 file changed, 60 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
deleted file mode 100644
index f8c05bb4116eae54..0000000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
-
-The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
-and several fixed ratio dividers.
-The CPG also provides a Clock Domain for SoC devices, in combination with the
-CPG Module Stop (MSTP) Clocks.
-
-Required Properties:
-
- - compatible: Must be one of
- - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
- - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
- - "renesas,r8a7792-cpg-clocks" for the r8a7792 CPG
- - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
- - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
- and "renesas,rcar-gen2-cpg-clocks" as a fallback.
-
- - reg: Base address and length of the memory resource used by the CPG
-
- - clocks: References to the parent clocks: first to the EXTAL clock, second
- to the USB_EXTAL clock
- - #clock-cells: Must be 1
- - clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
- "adsp"
- - #power-domain-cells: Must be 0
-
-SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed
-through an MSTP clock should refer to the CPG device node in their
-"power-domains" property, as documented by the generic PM domain bindings in
-Documentation/devicetree/bindings/power/power_domain.txt.
-
-
-Examples
---------
-
- - CPG device node:
-
- cpg_clocks: cpg_clocks@e6150000 {
- compatible = "renesas,r8a7790-cpg-clocks",
- "renesas,rcar-gen2-cpg-clocks";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk &usb_extal_clk>;
- #clock-cells = <1>;
- clock-output-names = "main", "pll0, "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "sd1", "z",
- "rcan", "adsp";
- #power-domain-cells = <0>;
- };
-
-
- - CPG/MSTP Clock Domain member device node:
-
- thermal@e61f0000 {
- compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
- reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
- power-domains = <&cpg_clocks>;
- };
--
2.17.1
