Add DT binding documentation for WIZ (SERDES wrapper). WIZ is *NOT* a
PHY but a wrapper used to configure some of the input signals to the
SERDES. It is used with both Sierra(16G) and Torrent(10G) serdes.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
[jsarha@xxxxxx: Add separate compatible for Sierra(16G) and Torrent(10G)
SERDES]
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
.../bindings/phy/ti,phy-j721e-wiz.txt | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
new file mode 100644
index 000000000000..19b4c3e855d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.txt
@@ -0,0 +1,95 @@
+TI J721E WIZ (SERDES Wrapper)
+
+Required properties:
+ - compatible: Should be "ti,j721e-wiz-16g" for Sierra phy wrapper,
+ or "ti,j721e-wiz-10g" for Torrent phy wrapper.
+ - #address-cells : should be 2 to indicate the child node should use 2 cell
+ for address
+ - #size-cells: should be 2 to indicate the child node should use 2 cell for
+ size
+ - power-domains: As documented by the generic PM domain bindings in
+ Documentation/devicetree/bindings/power/power_domain.txt.
+ - clocks: clock-specifier to represent input to the WIZ required for WIZ
+ module to be functional
+ - num-lanes: Represents thenumber of lanes enabled in the SoC
+ Should be '2' for Sierra wrapper in J721E
+ Should be '4' for Torrent wrapper in J721E
+ - #reset-cells: As documented by the generic reset bindings in
+ Documentation/devicetree/bindings/reset/reset.txt
+ Should be '1'
+ - ranges: Empty ranges property to describe 1:1 translation between parent
+ address space and child address space
+
+Optional properties:
+assigned-clocks and assigned-clock-parents: As documented in the generic
+clock bindings in Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required subnodes:
+ - Clock Subnode: WIZ node should have '3' subnodes for each of the clock
+ selects it supports. The clock subnodes should have the following names
+ 1) pll0_refclk
+ 2) pll1_refclk
+ 3) refclk_dig
+ Each of these subnodes should clocks, clock-output-names, #clock-cells,
+ assigned-clocks and assigned-clock-parents. All these properties are
+ documented in the generic clock bindings in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ - SERDES Subnode: WIZ node should have '1' subnode for the SERDES
+ *) Sierra SERDES should follow the bindings specified in
+ Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+ *) Torrent SERDES should follow the bindings specified in
+ Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+
+Example: Example shows binding for SERDES_16G (Sierra SERDES with WIZ wrapper)
+serdes_wiz0: wiz@5000000 {
+ compatible = "ti,j721e-wiz-16g";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 292 5>;
+ num-lanes = <2>;
+ #reset-cells = <1>;
+ ranges;
+
+ pll0_refclk: pll0_refclk {
+ clocks = <&k3_clks 292 11>, <&cmn_refclk>;
+ clock-output-names = "pll0_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&pll0_refclk>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ pll1_refclk: pll1_refclk {
+ clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
+ clock-output-names = "pll1_refclk";
+ #clock-cells = <0>;
+ assigned-clocks = <&pll1_refclk>;
+ assigned-clock-parents = <&k3_clks 292 0>;
+ };
+
+ refclk_dig: refclk_dig {
+ clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+ <&cmn_refclk>, <&cmn_refclk1>;
+ clock-output-names = "refclk_dig";
+ #clock-cells = <0>;
+ assigned-clocks = <&refclk_dig>;
+ assigned-clock-parents = <&k3_clks 292 11>;
+ };
+
+ serdes0: serdes@5000000 {
+ compatible = "cdns,ti,sierra-phy-t0";
+ reg-names = "serdes";
+ reg = <0x00 0x5000000 0x00 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ resets = <&serdes_wiz0 0>;
+ reset-names = "sierra_reset";
+ pcie0_phy0: link@0 {
+ reg = <0>;
+ cdns,num-lanes = <2>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+ };
+ };
+};
--
2.17.1
