śr., 16 paź 2019 o 09:51 Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx> napisał(a):
>
> Although in the most platforms, the power of eeprom and i2c
> are alway on, some platforms disable the eeprom and i2c power
> in order to meet low power request.
> This patch add the pm_runtime ops to control power to support
> all platforms.
>
> Changes since v2:
> - rebase onto v5.4-rc1
> - add pm_runtime_disable and regulator_bulk_disable at
> err return in probe function
>
> Changes since v1:
> - remove redundant code
> - fixup coding style
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
> ---
> drivers/misc/eeprom/at24.c | 63 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 2cccd82a3106..7ff614aef301 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -22,6 +22,7 @@
> #include <linux/nvmem-provider.h>
> #include <linux/regmap.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/gpio/consumer.h>
>
> /* Address pointer is 16 bit. */
> @@ -67,6 +68,12 @@
> * which won't work on pure SMBus systems.
> */
>
> +static const char * const at24_supply_names[] = {
> + "power", "i2c",
> +};
> +
> +#define AT24_NUM_SUPPLIES ARRAY_SIZE(at24_supply_names)
> +
> struct at24_client {
> struct i2c_client *client;
> struct regmap *regmap;
> @@ -91,6 +98,8 @@ struct at24_data {
>
> struct gpio_desc *wp_gpio;
>
> + bool has_supplies;
> + struct regulator_bulk_data supplies[AT24_NUM_SUPPLIES];
> /*
> * Some chips tie up multiple I2C addresses; dummy devices reserve
> * them for us, and we'll use them with SMBus calls.
> @@ -662,6 +671,15 @@ static int at24_probe(struct i2c_client *client)
> at24->client[0].client = client;
> at24->client[0].regmap = regmap;
>
> + for (i = 0; i < AT24_NUM_SUPPLIES; i++)
> + at24->supplies[i].supply = at24_supply_names[i];
> +
> + err = devm_regulator_bulk_get(&at24->client[0].client->dev,
> + AT24_NUM_SUPPLIES, at24->supplies);
> + if (err == -EPROBE_DEFER)
> + return err;
> + at24->has_supplies = !err;
One more thing I noticed: we should only set has_supplies to NULL if
the error code returned by regulator_bulk_get is ENODEV. Other errors
should break the execution of probe().
Bart
> +
> at24->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_HIGH);
> if (IS_ERR(at24->wp_gpio))
> return PTR_ERR(at24->wp_gpio);
> @@ -704,14 +722,26 @@ static int at24_probe(struct i2c_client *client)
> /* enable runtime pm */
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
> + pm_runtime_get_sync(dev);
> + if (at24->has_supplies) {
> + err = regulator_bulk_enable(AT24_NUM_SUPPLIES, at24->supplies);
> + if (err) {
> + dev_err(dev, "Failed to enable power regulators\n");
> + pm_runtime_disable(dev);
> + return err;
> + }
> + }
>
> /*
> * Perform a one-byte test read to verify that the
> * chip is functional.
> */
> err = at24_read(at24, 0, &test_byte, 1);
> - pm_runtime_idle(dev);
> + pm_runtime_put(dev);
> if (err) {
> + if (at24->has_supplies)
> + regulator_bulk_disable(AT24_NUM_SUPPLIES,
> + at24->supplies);
> pm_runtime_disable(dev);
> return -ENODEV;
> }
> @@ -725,15 +755,46 @@ static int at24_probe(struct i2c_client *client)
>
> static int at24_remove(struct i2c_client *client)
> {
> + struct at24_data *at24 = i2c_get_clientdata(client);
> +
> pm_runtime_disable(&client->dev);
> pm_runtime_set_suspended(&client->dev);
> + if (at24->has_supplies)
> + regulator_bulk_disable(AT24_NUM_SUPPLIES, at24->supplies);
>
> return 0;
> }
>
> +static int __maybe_unused at24_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct at24_data *at24 = i2c_get_clientdata(client);
> +
> + if (at24->has_supplies)
> + return regulator_bulk_disable(AT24_NUM_SUPPLIES,
> + at24->supplies);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused at24_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct at24_data *at24 = i2c_get_clientdata(client);
> +
> + if (at24->has_supplies)
> + return regulator_bulk_enable(AT24_NUM_SUPPLIES,
> + at24->supplies);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(at24_pm_ops, at24_suspend, at24_resume);
> +
> static struct i2c_driver at24_driver = {
> .driver = {
> .name = "at24",
> + .pm = &at24_pm_ops,
> .of_match_table = at24_of_match,
> .acpi_match_table = ACPI_PTR(at24_acpi_ids),
> },
> --
> 2.18.0
>
