On 2019-10-16 13:45, Vinod Koul wrote:
On 04-10-19, 16:50, Kiran Gunda wrote:
Add support for the PM6150 and PM6150L GPIO support to the
Qualcomm PMIC GPIO binding.
Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 4 ++++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
2 files changed, 6 insertions(+)
diff --git
a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index c32bf32..2f48cca 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -23,6 +23,8 @@ PMIC's from Qualcomm.
"qcom,pms405-gpio"
"qcom,pm8150-gpio"
"qcom,pm8150b-gpio"
+ "qcom,pm6150-gpio"
+ "qcom,pm6150l-gpio"
And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
if the device is on an spmi bus or an ssbi bus respectively
@@ -100,6 +102,8 @@ to specify in a pin configuration subnode:
and gpio8)
gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7)
gpio1-gpio12 for pm8150l (hole on gpio7)
+ gpio1-gpio10 for pm6150
+ gpio1-gpio12 for pm6150l
No holes on these?
Yes. No holes.
Other than this:
Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx>
- function:
Usage: required
diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index f1fece5..387917c 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1121,6 +1121,8 @@ static int pmic_gpio_remove(struct
platform_device *pdev)
{ .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
/* pm8150l has 12 GPIOs with holes on 7 */
{ .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
{ },
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project